Product Information
- Fully-synthetic brake fluid with oxidation and corrosion inhibitors
- For hydraulic brake and clutch systems
- Mixable with any other fully-synthetic, glycol-based brake fluids
- Excellent dry and wet boiling point properties
Vehicle Repairs. We've Got What It Takes.
Fluid is an important safety-critical component within a vehicle’s braking system. febi’s DOT 4, DOT 4 LV (low viscosity), DOT 4 Plus, DOT 5.1 and DOT 5.1 EHV (electric and hybrid vehicle) range of fully-synthetic brake fluids is based on glycols, and they contain oxidation and corrosion inhibitors, feature excellent dry and wet boiling point properties, and prevent vapour bubble formation.
Friction during the braking process generates heat; some of this heat is absorbed by the brake fluid, which must meet the requirements defined in the applicable standards: Dry boiling point of the brake fluid with no water content [°C], Wet boiling point of the brake fluid with water content [°C], pH value of the brake fluid.
The parameters are defined by standards FMVSS No. 116, SAE J1703, ISO 4925 and PN-EN ISO 2719: 2016-08 and constitute some of the basic criteria for determining the suitability for use. These parameters for brake fluid are summarised according to standards SAE J1703 and ISO 4925 (dry and wet boiling points, viscosity), as well as FMVSS No. 116 (pH value).
Reliability in braking
To ensure an effective and fully-functioning braking system while guaranteeing driving safety in road traffic, febi brake fluids are developed in accordance with the binding quality standards and requirements of vehicle and brake system manufacturers to meet all the requirements for current brake systems, including electronically-controlled brake systems which need to perform reliably and within fractions of a second.
Optimal Packaging Design
Brake fluids from febi are an excellent choice. This is demonstrated not only by the quality - but also by the user-friendly packaging design.
The clear labelling of the products through the use of colour-coding makes their identification simple. Special recessed grips on the recyclable, leak-proof Polyethylene bottles make filling noticeably easier.
Selected Language / Multilanguage
Alternate Language
| Suitable to replace | Reference(s) |
|---|---|
| Universal | Universell |
| General Service Number | FMVSS 116 DOT 5.1 | ISO 4925 Class 3 | ISO 4925 Class 4 | ISO 4925 Class 5.1 | SAE J 1703 | SAE J 1704 |