21497

Product Information

High wear protection
Optimal fitting accuracy for easier repairs
Strict quality standards
Compliance with the requirements of vehicle manufacturers

Vehicle Repairs. We've Got What It Takes.

The greatest challenge for modern, technologically complex vehicles is the balance between performance, economy, and environmental compatibility. However, many of the roads they drive on are far from perfect. As a result, the chassis and the steering are often subjected to extreme loads, which accordingly increases the quality demands placed on wear parts.

Steering parts in particular are subject to special care in design, manufacturing, and assembly. This is why febi only offers steering parts in OE matching quality. In order to maintain stable road holding, even in hazardous situations, all installed steering parts must meet the high requirements of precise and high-quality production.

With a large selection of safety-relevant steering components, febi makes a contribution to road safety.

Quality by Conviction

In order to ensure absolutely reliable absorption of the vertical and horizontal forces that occur during acceleration, braking, and cornering, febi's control arm mounting kits are intensively tested.

Our quality management tests the products offered for various requirements and loads. These include fitting accuracy, dimensional accuracy, material quality, tensile strength, and degrees of hardness.

In the area of steering technology, febi is one of the leading suppliers in the Independent Aftermarket. The product range exclusively includes control arm mounting kits that guarantee 100% driving stability and meet, or even exceed, the approval requirements.

Supplied Complete. Repaired Non-stop.

In everyday workshop life, it is not uncommon for a worn part to have to be replaced as well as any fixings. However, these additional parts - usually bolts or nuts - are often not included with the individually available replacement part.

With the ProKits, febi provides a remedy and offers control arm mounting kits with all attachments required for fair value repair. In addition to control arm bearings, attachment brackets, and ball joints, these can also include nuts, bolts, washers, and spring washers.

Kit or Set Content

	description	Number	Characteristics
21126	Bolt Kit for for stabilizer link	2	Fastening Type: Hexagonal Fitting Position: front axle left Fitting Position: front axle right Length: 71 mm Outside Thread: M10 x 1 shaft length: 12 mm Surface: oiled Tensile Strength Grade: 10.9 Thread Length: 50 mm Wrench Size (metric): 16 mm
This article is not sold separately.	Bolt	2	Fitting Position: front axle Outside Thread: M10 x 1,5 shaft length: 30 mm Thread Length: 20 mm
21481	Bolt for control arm	2	Fitting Position: front axle Length: 106 mm Outside Thread: M10 x 1,5 shaft length: 72 mm Tensile Strength Grade: 8.8 Thread Length: 28 mm Wrench Size (metric): 16 mm
This article is not sold separately.	Bolt	2	Fitting Position: front axle Length: 92 mm Outside Thread: M12 x 1,5 shaft length: 56 mm Tensile Strength Grade: 10.9 Thread Length: 29 mm Wrench Size (metric): 18 mm
This article is not sold separately.	Bolt	2	Fitting Position: front axle Length: 108 mm Length under Head: 92 mm Outer Diameter: 24 mm Outside Thread: M12 x 1,5 Tensile Strength Grade: 10.9 Wrench Size (metric): 18 mm
This article is not sold separately.	Bolt	2	Fitting Position: front axle Length: 120 mm Outside Thread: M12 x 1,5
This article is not sold separately.	Bolt	2	Fitting Position: front axle Height or Thickness: 2 mm Length: 30 mm Outer Diameter: 22 mm Outside Thread: M8 x 1,25 Thread Length: 21 mm
15902	Collar Nut	4	collar shape for bolts and nuts: flat seat Fastening Type: Hexagonal Fitting Position: front axle Height or Thickness: 12 mm internal thread: M12 x 1,5 Outer Diameter: 30 mm Surface: zinc-nickel coated Tensile Strength Grade: 8 Wrench Size (metric): 18 mm
14392	Hex Nut	6	collar shape for bolts and nuts: flat seat Fastening Type: Hexagonal Height or Thickness: 16 mm internal thread: M12 x 1,5 Tensile Strength Grade: 10 Thread Mode: self locking Wrench Size (metric): 18 mm
22263	Nut	4	collar shape for bolts and nuts: flat seat DIN - ISO: 6927 Fastening Type: Hexagonal Height or Thickness: 11 mm internal thread: M10 x 1,5 Material: steel Outer Diameter: 21,2 mm Surface: galvanized Tensile Strength Grade: 10 Thread Mode: self locking Wrench Size (metric): 16 mm

Available in Kit or Set

26600

Control Arm Kit

without stabilizer links, without ends

Comparison Number(s)

Suitable to replace	Reference(s)
Audi	NYA
Škoda	NYA
Volkswagen (VW)	NYA
General Service Number	CA MOUNTING KIT 01

Used In Vehicles

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Trouble finding the part you were looking for?

Inform us here!

Please let us know the OE reference number for the part you cannot find. Alternatively, please include the vehicle registration or VIN with a description of the product you require. All feedback will be considered in our range development process for new bilstein group articles.

E-Mail

Country

Please provide the details below:

By submitting this form you accept our Data Protection Regulations .

Have a general inquiry?

If you have a sales, technical or warranty query - or something else entirely - please follow the link below:

Contact

FANS is a tool that allows you, as a user of partsfinder, to contribute to the ongoing development of the bilstein group product range to ensure we have the right articles - for the right applications - at the right time.