37204


37204

3 years warranty febi

Product Information

  • Robust construction for perfect function
  • Optimal fitting accuracy for easier repairs
  • Strict quality standards
  • Compliance with the requirements of vehicle manufacturers

Vehicle Repairs. We've Got What It Takes.

Rubber-to-metal parts are used as elastic joints between chassis and body, especially in multi-link axle designs. They absorb the vibrations generated by the road surface and drive units while the vehicle is in motion and thus makes a significant contribution to increasing driving comfort and noise insulation. In addition, they ensure driving safety by improving steering behaviour and driving stability on uneven road surfaces as well as braking and avoidance manoeuvers.

Control arms are the link between the suspension strut and the bodywork. They hold the strut in position and absorb forces in the longitudinal and transverse directions when accelerating and decelerating as well as when cornering. Due to the suspension, they must be mounted so that they can move up and down. Control arms from febi are precisely manufactured and have high-quality supporting ball joints and bearings with the ideal rubber hardness and elasticity.

Quality by Conviction

In the steering technology sector, febi is one of the leading suppliers in the Independent Aftermarket. For example, control arms: the range exclusively includes control arms that guarantee 100% driving stability.

Control arms from febi are therefore intensively tested. Our quality management tests the offered control arms for various requirements and loads, e.g. fitting accuracy, dimensional accuracy, material quality, and tensile strength.

Supplied Complete. Repaired Non-stop.

In everyday workshop life, it is not uncommon for a wear part to have to be replaced as well as its attachment material. However, these additional articles are often not included with the individually available replacement part.

With the ProKits, febi provides a remedy. febi also offers complete control arm kits for certain vehicle types which contain all the mounting material such as the nuts & bolts required for a professional replacement.

febi ProKit is the tailor-made, complete solution in which necessary repairs can be carried out without delay.

Kit or Set Content
description Number Characteristics
09529
Control Arm with bushes and without joint 1
  • Fitting Position: front axle left
  • Fitting Position: front axle right
  • Fitting Position: lower
  • Material: sheet steel
02942
Ball Joint 1
  • cone size: 19 mm
  • Diameter of the attachment points: 8,5 mm
  • Fitting Position: front axle left
  • Fitting Position: front axle right
  • Fitting Position: lower
07862
This article is not sold separately.
Lock Washer for ball joint 1
  • internal thread: M8 x 1,25
07866
This article is not sold separately.
Bolt for ball joint 3
  • Length: 34 mm
  • Length under Head: 26 mm
  • Outer Diameter: 16,5 mm
  • Outside Thread: M8 x 1,25
  • Surface: oiled
  • Tensile Strength Grade: 10.9
  • Wrench Size (metric): 13 mm
Customers also changed
Technical information

Selected Language / Multilanguage

    Alternate Language

    Comparison Number(s)
    Suitable to replace Reference(s)
    Volkswagen (VW) 357 407 151 S1 | 357 407 153 S1
    Used In Vehicles
    Please select a Manufacturer for detailed Vehicle Information or to use the Expert View.