37878

Product Information

Long service life
Optimal fitting accuracy for easier repairs
Strict quality standards
Compliance with the requirements of vehicle manufacturers

Vehicle Repairs. We've Got What It Takes.

The greatest challenge for modern, technologically complex vehicles is the balance between performance, economy, and environmental compatibility. However, many of the roads they drive on are far from perfect. The suspension in particular is therefore frequently exposed to extreme loads which accordingly increases the quality demands placed on wear parts.

The strut top mounting connects the damper with the body. It also helps to ensure that the tyres have ideal contact with the road surface. The relevance for driving comfort and road safety is correspondingly high. This is why febi only offers strut mountings in OE matching quality.

Quality by Conviction

To ensure absolutely reliable absorption of the vertical and horizontal forces that occur during acceleration, braking, and cornering, febi strut mountings are intensively tested.

Our quality management tests the offered strut mountings for various requirements and loads. These include fitting accuracy, dimensional accuracy, material quality, tensile strength, and degrees of hardness. The range exclusively includes strut mountings that guarantee 100% driving stability.

Supplied Complete. Repaired Non-stop.

In everyday workshop life, it is not uncommon for a worn part to have to be replaced as well as any fixings. However, these additional parts - usually bolts or nuts - are often not included with the individually available replacement part.

With the ProKits, febi remedies this situation and offers strut mountings with all the add-on parts required for fair value repair.

Kit or Set Content

	description	Number	Characteristics
09227	Strut Mounting without ball bearing	1	Fitting Position: front axle left Fitting Position: front axle right height: 54 mm Inner Diameter: 26 mm Material: rubber / metal Outer Diameter: 83 mm
This article is not sold separately.	Hex Nut for strut mounting	1	Fastening Type: Hexagonal Height or Thickness: 11,9 mm internal thread: M14 x 1,5 Tensile Strength Grade: 8 Wrench Size (metric): 21 mm
14392	Hex Nut	1	collar shape for bolts and nuts: flat seat Fastening Type: Hexagonal Height or Thickness: 16 mm internal thread: M12 x 1,5 Tensile Strength Grade: 10 Thread Mode: self locking Wrench Size (metric): 18 mm
01111	Ball Bearing for strut mounting	1	Bearing Type (Roller Bearing): angular ball bearing Fitting Position: front axle left Fitting Position: front axle right Inner Diameter: 14 mm Material: plastic Outer Diameter: 45 mm Width: 13,5 mm
This article is not sold separately.	Bolt for shock absorber mounting	1	Fastening Type: internal multi-spline head Fitting Position: front axle left Fitting Position: front axle right Length: 91 mm Length under Head: 80 mm Outside Thread: M12 x 1,5 Tensile Strength Grade: 10.9

Customers also bought

09228

Strut Mounting Kit

with ball bearing

Comparison Number(s)

Suitable to replace	Reference(s)
Audi	1J0 412 331 C S2
Seat	1J0 412 331 C S2
Škoda	1J0 412 331 C S2
Škoda-FAW	NYA
Volkswagen (VW)	1J0 412 331 C S2
Volkswagen (VW)-FAW	NYA
Volkswagen (VW)-SVW	NYA

Used In Vehicles

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Trouble finding the part you were looking for?

Inform us here!

Please let us know the OE reference number for the part you cannot find. Alternatively, please include the vehicle registration or VIN with a description of the product you require. All feedback will be considered in our range development process for new bilstein group articles.

E-Mail

Country

Please provide the details below:

By submitting this form you accept our Data Protection Regulations .

Have a general inquiry?

If you have a sales, technical or warranty query - or something else entirely - please follow the link below:

Contact

FANS is a tool that allows you, as a user of partsfinder, to contribute to the ongoing development of the bilstein group product range to ensure we have the right articles - for the right applications - at the right time.