39077

Tie Rod End with bolts and nuts

Fitting Position: front axle left, front axle right
3 years warranty febi
Characteristics
Outside Thread
Outside Thread:
M14 x 1,5

Product Information

  • Long service life
  • Optimal fitting accuracy for easier repairs
  • Strict quality standards
  • Compliance with the requirements of vehicle manufacturers

Vehicle Repairs. We've Got What It Takes.

The greatest challenge for modern, technologically complex vehicles is the balance between performance, economy, and environmental compatibility. However, many of the roads they drive on are far from perfect. As a result, the chassis and the steering are often subjected to extreme loads, which accordingly increases the quality demands placed on wear parts.

Steering parts in particular are subject to special care in design, manufacturing, and assembly. This is why febi only offers steering parts in OE matching quality. In order to maintain stable road holding, even in hazardous situations, all installed steering parts must meet the high requirements of precise and high-quality production.

With a large selection of safety-relevant steering components, including tie rod ends, febi makes a contribution to road safety.

Quality by Conviction

Tie rod ends from febi are intensively tested. Our quality management tests the offered tie rod ends for various requirements and loads. These include fitting accuracy, dimensional accuracy, material quality, tensile strength, and degrees of hardness.

In the area of steering technology, febi is one of the leading suppliers in the Independent Aftermarket. The range exclusively includes tie rod ends that guarantee 100% driving stability.

Supplied Complete. Repaired Non-stop.

In everyday workshop life, it is not uncommon for a worn part to have to be replaced as well as any fixings. However, these additional parts - usually bolts or nuts - are often not included with the individually available replacement part.

With the ProKits, febi provides a remedy and offers tie rods with all the attachments required for repair at fair value (e.g. tie rod end piece and lock nut).

Kit or Set Content
description Number Characteristics
21840
Tie Rod End with fastening material 1
  • Fitting Position: front axle left
  • Fitting Position: front axle right
  • Outside Thread: M14 x 1,5
22263
Nut 1
  • collar shape for bolts and nuts: flat seat
  • DIN - ISO: 6927
  • Fastening Type: Hexagonal
  • Height or Thickness: 11 mm
  • internal thread: M10 x 1,5
  • Material: steel
  • Outer Diameter: 21,2 mm
  • Surface: galvanized
  • Tensile Strength Grade: 10
  • Thread Mode: self locking
  • Wrench Size (metric): 16 mm
21478
This article is not sold separately.
Bolt 1
  • Fitting Position: front axle
  • Outside Thread: M10 x 1,5
  • shaft length: 30 mm
  • Thread Length: 20 mm
Available in Kit or Set
Technical information

Selected Language / Multilanguage

    Alternate Language

    Comparison Number(s)
    Suitable to replace Reference(s)
    Audi 4F0 498 811 A | 4F0 498 811 A S1 | 4F0 419 811 D | 4B0 419 811 G | 4D0 419 811 J | 4F0 419 811 C | 8E0 419 811
    Audi-FAW NYA
    Seat 4F0 498 811 A S1 | 4F0 419 811 C | 4F0 498 811 A
    Škoda 4F0 498 811 A S1 | 4F0 419 811 D | 4F0 419 811 C | 4F0 498 811 A
    Used In Vehicles
    Choose Manufacturer
    Please select a Manufacturer for detailed Vehicle Information or to use the Expert View.