39205
1
39205
Timing Belt Kit with crankshaft sprocket
| Characteristics | |
|---|---|
| Belt Material | Belt Material: HNBR (Therban) |
| No. of Teeth | No. of Teeth: 141 |
| Surface | Surface: Coated |
| Units / Rollers | Units / Rollers: incl. deflection pulley |
| Units / Rollers | Units / Rollers: incl. tension roller |
| Width | Width: 25,4 mm |
Product Information
- High-quality materials for a long service life
- Optimal fitting accuracy for easier repairs
- Strict quality standards
- Compliance with the requirements of vehicle manufacturers
Vehicle Repairs. We've Got What It Takes.
The engine is generally considered to be the heart of a vehicle. Its design requires a balance between peak performance and torque and the lowest possible consumption and emissions. Modern engines are precision work - just like every single replacement part from febi.
For vehicles with timing belt drive, febi offers a comprehensive range of wear parts in OE matching quality, including timing belts. They combine the characteristics of a timing chain and an auxiliary belt (flat belt). On the inside of the belt are teeth made of abrasion-resistant rubber or plastic, which engage in a special gear wheel.
Quality by Conviction
Due to their design, timing belts have various advantages over timing chains in some engine designs. An example of such is due to the sudden pressure build-up and very high dynamic stresses which occur. Chain drives are too stiff for this type of drive and snap because of the high load peaks. Thanks to the positive fit of the teeth, higher forces can be transmitted since the teeth make slippage impossible. Importantly: the quality of the timing belt must be flawless.
Timing belts from febi are therefore intensively tested. Our quality management tests the timing belts offered for various requirements and loads, e.g. fitting accuracy, dimensional accuracy, material quality, and tensile strength.
Complete Repair Kits
When replacing the timing belt, the surrounding components should also be checked for wear. For all parts to work together perfectly, it is extremely important that they are precise and made of high-quality materials.
febi offers complete timing belt kits for certain vehicle types which contain all the individual parts required for professional replacement, e.g. the tensioner pulley.
| description | Number | Characteristics | |
|---|---|---|---|
 | Timing Belt for camshaft | 1 |
|
 | Idler Pulley for timing belt | 1 |
|
 | Tensioner Pulley for timing belt | 1 |
|
 | Crankshaft Sprocket for timing belt, with sensor ring | 1 |
|
| Suitable to replace | Reference(s) |
|---|---|
| Citroën | 16 087 474 80 S2 | 0831.W2 S2 |
| DS | 16 087 459 80 S2 |
| FIAT | 9467643789 S2 |
| Ford | 1 787 857 S1 |
| Mazda | Y655-12-205 S2 |
| Peugeot | 16 087 474 80 S2 | 0831.W2 S2 |
| Volvo | 31370046 S2 |
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
