40745

Control Arm with bush, joint and additional parts

Fitting Position: upper, front axle left, front

40745

Characteristics
Material	Material: aluminium

Product Information

Robust construction for perfect function
Optimal fitting accuracy for easier repairs
Strict quality standards
Compliance with the requirements of vehicle manufacturers

Vehicle Repairs. We've Got What It Takes.

Rubber-to-metal parts are used as elastic joints between chassis and body, especially in multi-link axle designs. They absorb the vibrations generated by the road surface and drive units while the vehicle is in motion and thus makes a significant contribution to increasing driving comfort and noise insulation. In addition, they ensure driving safety by improving steering behaviour and driving stability on uneven road surfaces as well as braking and avoidance manoeuvers.

Control arms are the link between the suspension strut and the bodywork. They hold the strut in position and absorb forces in the longitudinal and transverse directions when accelerating and decelerating as well as when cornering. Due to the suspension, they must be mounted so that they can move up and down. Control arms from febi are precisely manufactured and have high-quality supporting ball joints and bearings with the ideal rubber hardness and elasticity.

Quality by Conviction

In the steering technology sector, febi is one of the leading suppliers in the Independent Aftermarket. For example, control arms: the range exclusively includes control arms that guarantee 100% driving stability.

Control arms from febi are therefore intensively tested. Our quality management tests the offered control arms for various requirements and loads, e.g. fitting accuracy, dimensional accuracy, material quality, and tensile strength.

Supplied Complete. Repaired Non-stop.

In everyday workshop life, it is not uncommon for a wear part to have to be replaced as well as its attachment material. However, these additional articles are often not included with the individually available replacement part.

With the ProKits, febi provides a remedy. febi also offers complete control arm kits for certain vehicle types which contain all the mounting material such as the nuts & bolts required for a professional replacement.

febi ProKit is the tailor-made, complete solution in which necessary repairs can be carried out without delay.

Kit or Set Content

	description	Number	Characteristics
32318	Control Arm with bush and joint	1	Fitting Position: front Fitting Position: front axle left Fitting Position: upper Material: aluminium
This article is not sold separately.	Bolt for for stabilizer link	1	Fastening Type: Hexagonal Fitting Position: front axle Length: 71 mm Length under Head: 62 mm Outer Diameter: 21,6 mm Outside Thread: M10 x 1,5 shaft length: 13 mm Tensile Strength Grade: 10.9 Thread Length: 49 mm Wrench Size (metric): 16 mm
22263	Nut	1	collar shape for bolts and nuts: flat seat DIN - ISO: 6927 Fastening Type: Hexagonal Height or Thickness: 11 mm internal thread: M10 x 1,5 Material: steel Outer Diameter: 21,2 mm Surface: galvanized Tensile Strength Grade: 10 Thread Mode: self locking Wrench Size (metric): 16 mm
This article is not sold separately.	Bolt for control arm	1	DIN - ISO: 931 Length under Head: 105 mm Outside Thread: M10 x 1,5 Tensile Strength Grade: 8.8 Thread Length: 29 mm Wrench Size (metric): 16 mm
This article is not sold separately.	Nut	1	collar shape for bolts and nuts: flat seat DIN - ISO: 985 Fastening Type: Hexagonal Height or Thickness: 13,1 mm Outer Diameter: 21,2 mm Outside Thread: M10 x 1,5 Wrench Size (metric): 16 mm
This article is not sold separately.	Washer for control arm	1	Height or Thickness: 2 mm Inner Diameter: 11 mm Outer Diameter: 20 mm
This article is not sold separately.	Bolt	1	Fitting Position: front axle Outside Thread: M10 x 1,5 shaft length: 30 mm Thread Length: 20 mm
This article is not sold separately.	Nut for control arm	1	Fastening Type: Hexagonal Height or Thickness: 11 mm internal thread: M10 x 1,5 Outer Diameter: 20 mm Tensile Strength Grade: 10 Wrench Size (metric): 16 mm
This article is not sold separately.	Hex Bolt	1	Fastening Type: Hexagonal Length: 82 mm Outside Thread: M12 x 1,5 shaft length: 45 mm Tensile Strength Grade: 10.9 Thread Length: 30 mm Wrench Size (metric): 18 mm
14392	Hex Nut	1	collar shape for bolts and nuts: flat seat Fastening Type: Hexagonal Height or Thickness: 16 mm internal thread: M12 x 1,5 Tensile Strength Grade: 10 Thread Mode: self locking Wrench Size (metric): 18 mm

Customers also changed

40746

Control Arm

with bush, joint and additional parts

Technical information

Selected Language / Multilanguage

Alternate Language

febiINFO English

Comparison Number(s)

Suitable to replace	Reference(s)
Audi	8E0 407 505 P S1 \| 8D0 407 505 D S1 \| 8D0 407 505 E S1 \| 8D0 407 505 L S1 \| 8E0 407 505 C S1
Audi-FAW	NYA
Seat	8E0 407 505 P S1 \| 8D0 407 505 D S1 \| 8D0 407 505 E S1 \| 8D0 407 505 L S1 \| 8E0 407 505 C S1

Used In Vehicles

Choose Manufacturer

Please select a Manufacturer for detailed Vehicle Information or to use the Expert View.

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Trouble finding the part you were looking for?

Inform us here!

Please let us know the OE reference number for the part you cannot find. Alternatively, please include the vehicle registration or VIN with a description of the product you require. All feedback will be considered in our range development process for new bilstein group articles.

E-Mail

Country

Please provide the details below:

By submitting this form you accept our Data Protection Regulations .

Have a general inquiry?

If you have a sales, technical or warranty query - or something else entirely - please follow the link below:

Contact

FANS is a tool that allows you, as a user of partsfinder, to contribute to the ongoing development of the bilstein group product range to ensure we have the right articles - for the right applications - at the right time.