43699

Mounting Kit for control arm

Fitting Position: front axle left, front axle right

43699

Product Information

High wear protection
Optimal fitting accuracy for easier repairs
Strict quality standards
Compliance with the requirements of vehicle manufacturers

Vehicle Repairs. We've Got What It Takes.

The greatest challenge for modern, technologically complex vehicles is the balance between performance, economy, and environmental compatibility. However, many of the roads they drive on are far from perfect. As a result, the chassis and the steering are often subjected to extreme loads, which accordingly increases the quality demands placed on wear parts.

Steering parts in particular are subject to special care in design, manufacturing, and assembly. This is why febi only offers steering parts in OE matching quality. In order to maintain stable road holding, even in hazardous situations, all installed steering parts must meet the high requirements of precise and high-quality production.

With a large selection of safety-relevant steering components, febi makes a contribution to road safety.

Quality by Conviction

In order to ensure absolutely reliable absorption of the vertical and horizontal forces that occur during acceleration, braking, and cornering, febi's control arm mounting kits are intensively tested.

Our quality management tests the products offered for various requirements and loads. These include fitting accuracy, dimensional accuracy, material quality, tensile strength, and degrees of hardness.

In the area of steering technology, febi is one of the leading suppliers in the Independent Aftermarket. The product range exclusively includes control arm mounting kits that guarantee 100% driving stability and meet, or even exceed, the approval requirements.

Supplied Complete. Repaired Non-stop.

In everyday workshop life, it is not uncommon for a worn part to have to be replaced as well as any fixings. However, these additional parts - usually bolts or nuts - are often not included with the individually available replacement part.

With the ProKits, febi provides a remedy and offers control arm mounting kits with all attachments required for fair value repair. In addition to control arm bearings, attachment brackets, and ball joints, these can also include nuts, bolts, washers, and spring washers.

Kit or Set Content

	description	Number	Characteristics
This article is not sold separately.	Bolt for control arm	1	Fastening Type: external - torx Length under Head: 125 mm Max. length: 140 mm Outside Thread: M14 x 1,5 Thread Length: 89 mm
This article is not sold separately.	Spacer Disc for control arm	2	Fitting Position: on passenger side Inner Diameter: 14,2 mm Outer Diameter: 35 mm Surface: oiled Width: 6 mm
This article is not sold separately.	Captive Nut for lower control arm	1	Fitting Position: front axle left Fitting Position: front axle right Height or Thickness: 29 mm Length: 97 mm Outside Thread: M14 x 1,5 Surface: Delta Protect Width: 34 mm Wrench Size (metric): 21 mm
This article is not sold separately.	Bolt for control arm bush	1	Fastening Type: external - torx Fitting Position: front axle Length: 40,5 mm Length under Head: 29 mm Outside Thread: M10 x 1,5 Thread Length: 21 mm
22263	Nut	2	collar shape for bolts and nuts: flat seat DIN - ISO: 6927 Fastening Type: Hexagonal Height or Thickness: 11 mm internal thread: M10 x 1,5 Material: steel Outer Diameter: 21,2 mm Surface: galvanized Tensile Strength Grade: 10 Thread Mode: self locking Wrench Size (metric): 16 mm
This article is not sold separately.	Bolt for control arm	2	Fastening Type: external - torx Length: 112 mm Length under Head: 100 mm Outside Thread: M10 x 1,5 Thread Length: 78 mm
This article is not sold separately.	Bolt	1	Fastening Type: Hexagonal Length: 103 mm Length under Head: 90 mm Outside Thread: M14 x 1,5 Surface: oiled Tensile Strength Grade: 10.9 Wrench Size (metric): 21 mm
This article is not sold separately.	Lock Nut	1	Fitting Position: front axle Height or Thickness: 14 mm internal thread: M14 x 1,5 Tensile Strength Grade: 10 Wrench Size (metric): 21 mm

Customers also bought

40967

40966

40977

40978

Comparison Number(s)

Suitable to replace	Reference(s)
Mercedes-Benz	246 990 01 56 S2 \| 000000 005272 S2 \| 002 990 70 50 S2 \| 910112 014000 S2 \| 000000 003275 S2 \| 000000 003281 S2 \| 000000 005268 S2 \| 000000 007799 S2 \| 000 990 66 11 S2 \| 001 990 89 03 S2 \| 001 990 90 03 S2 \| 005 990 59 00 S2 \| 156 330 01 00 SK1 \| 156 330 02 00 SK1 \| 156 330 05 00 SK1 \| 156 330 06 00 SK1 \| 220 333 00 76 S2 \| 246 330 17 07 SK1 \| 246 330 18 07 SK1 \| 246 330 47 00 SK2 \| 246 330 48 00 SK2 \| 910105 014016 S3 \| 913023 010002 S2

Used In Vehicles

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Trouble finding the part you were looking for?

Inform us here!

Please let us know the OE reference number for the part you cannot find. Alternatively, please include the vehicle registration or VIN with a description of the product you require. All feedback will be considered in our range development process for new bilstein group articles.

E-Mail

Country

Please provide the details below:

By submitting this form you accept our Data Protection Regulations .

Have a general inquiry?

If you have a sales, technical or warranty query - or something else entirely - please follow the link below:

Contact

FANS is a tool that allows you, as a user of partsfinder, to contribute to the ongoing development of the bilstein group product range to ensure we have the right articles - for the right applications - at the right time.