44170

Control Arm Bush Kit with bolts and lock nuts

Fitting Position: front axle left, front, front axle right

44170

Characteristics
Inner Diameter	Inner Diameter: 19,8 mm
Length	Length: 38 mm
Outer Diameter	Outer Diameter: 46 mm
Outer Diameter	Outer Diameter: 60 mm

Product Information

Specific rubber compound reliability prevents vibrations
Optimal fitting accuracy for easier repairs
Strict quality standards
Compliance with the requirements of vehicle manufacturers

Vehicle Repairs. We've Got What It Takes.

Rubber-to-metal parts are used as elastic joints between chassis and body, especially in multi-link axle designs. They absorb the vibrations generated by the road surface and drive units while the vehicle is in motion thus making a significant contribution to increasing driving comfort and noise insulation. In addition, they ensure driving safety by improving steering behaviour and driving stability on uneven road surfaces as well as braking and avoidance manoeuvers.

In the rubber-to-metal sector, febi offers one of the widest ranges in the Independent Aftermarket - naturally in OE matching quality. This also includes bearings for control arms, which febi also offers as liquid-filled hydraulic bush.

Quality by Conviction

The control arm is attached to the body by bearings. They allow the necessary movements for the suspension, dampen shocks and vibrations, but also provide sufficient stiffness and robustness for stable driving behaviour. For this important task, only parts that meet the highest demands should be used.

Control arm bushes from febi are therefore intensively tested. Our quality management tests the offered control arm bushes for various requirements and loads, e.g. fitting accuracy, dimensional accuracy, material quality, and tensile strength.

The Right (Rubber) Compound

The elastomer materials used in the manufacturing of rubber-to-metal parts are precisely matched to the technical requirements and loads of their specific installation position. febi's product range exclusively includes rubber-to-metal parts whose rubber compounds are also used by the original manufacturers.

Kit or Set Content

	description	Number	Characteristics
40971	Control Arm Bush	2	Fitting Position: front axle left Fitting Position: front axle right Fitting Position: rear Inner Diameter: 19,8 mm Length: 38 mm Outer Diameter: 46 mm Outer Diameter: 60 mm
This article is not sold separately.	Bolt for control arm	1	Fastening Type: external - torx Length under Head: 125 mm Max. length: 140 mm Outside Thread: M14 x 1,5 Thread Length: 89 mm
This article is not sold separately.	Spacer Disc for control arm	1	Fitting Position: on passenger side Inner Diameter: 14,2 mm Outer Diameter: 35 mm Surface: oiled Width: 6 mm
This article is not sold separately.	Captive Nut for lower control arm	1	Height or Thickness: 32 mm internal thread: M14 x 1,5 Length: 93,5 mm Surface: Delta Protect Width: 30 mm Wrench Size (metric): 21 mm
This article is not sold separately.	Bolt for control arm bush	1	Fastening Type: external - torx Fitting Position: front axle Length: 40,5 mm Length under Head: 29 mm Outside Thread: M10 x 1,5 Thread Length: 21 mm
22263	Nut	2	collar shape for bolts and nuts: flat seat DIN - ISO: 6927 Fastening Type: Hexagonal Height or Thickness: 11 mm internal thread: M10 x 1,5 Material: steel Outer Diameter: 21,2 mm Surface: galvanized Tensile Strength Grade: 10 Thread Mode: self locking Wrench Size (metric): 16 mm
This article is not sold separately.	Bolt for control arm	2	Fastening Type: external - torx Length: 112 mm Length under Head: 100 mm Outside Thread: M10 x 1,5 Thread Length: 78 mm
This article is not sold separately.	Lock Nut	1	Fitting Position: front axle Height or Thickness: 14 mm internal thread: M14 x 1,5 Tensile Strength Grade: 10 Wrench Size (metric): 21 mm

Comparison Number(s)

Suitable to replace	Reference(s)
Mercedes-Benz	246 333 01 14 S2 \| 246 330 17 07 SK4 \| 246 330 18 07 SK4 \| 246 330 47 00 SK3 \| 246 330 48 00 SK3

Used In Vehicles

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Trouble finding the part you were looking for?

Inform us here!

Please let us know the OE reference number for the part you cannot find. Alternatively, please include the vehicle registration or VIN with a description of the product you require. All feedback will be considered in our range development process for new bilstein group articles.

E-Mail

Country

Please provide the details below:

By submitting this form you accept our Data Protection Regulations .

Have a general inquiry?

If you have a sales, technical or warranty query - or something else entirely - please follow the link below:

Contact

FANS is a tool that allows you, as a user of partsfinder, to contribute to the ongoing development of the bilstein group product range to ensure we have the right articles - for the right applications - at the right time.