44941


44941

3 years warranty febi

Product Information

  • Long service life
  • Optimal fitting accuracy for easier repairs
  • Strict quality standards
  • Compliance with the requirements of vehicle manufacturers

Vehicle Repairs. We've Got What It Takes.

The greatest challenge for modern, technologically complex vehicles is the balance between performance, economy, and environmental compatibility. However, many of the roads they drive on are far from perfect. As a result, the chassis and the steering are often subjected to extreme loads, which accordingly increases the quality demands placed on wear parts.

Steering parts in particular are subject to special care in design, manufacturing, and assembly. This is why febi only offers steering parts in OE matching quality. In order to maintain stable road holding, even in hazardous situations, all installed steering parts must meet the high requirements of precise and high-quality production.

In order to maintain stable road holding, even in hazardous situations, all installed steering parts must meet the high requirements of precise and high-quality production. With a large selection of safety-relevant steering components, including tie rods, febi makes a contribution to road safety.

Quality by Conviction

Tie rods from febi are intensively tested. Our quality management tests the offered products for different requirements and loads. These include fitting accuracy, dimensional accuracy, material quality, tensile strength, and degrees of hardness.

In the area of steering technology, febi is one of the leading suppliers in the Independent Aftermarket. The range exclusively includes tie rods that guarantee 100% driving stability and meet, or even exceed, the approval requirements of vehicle manufacturers.

Supplied Complete. Repaired Non-stop.

In everyday workshop life, it is not uncommon for a worn part to have to be replaced as well as any fixings. However, these additional parts - usually bolts or nuts - are often not included with the individually available replacement part.

With the ProKits, febi provides a remedy and offers tie rods with all the attachments required for repair at fair value (e.g. tie rod end piece and lock nut).

Kit or Set Content
description Number Characteristics
38560
Axial Joint with nut 1
  • Fitting Position: front axle left
  • Fitting Position: front axle right
  • internal thread: M14 x 1,5
  • Length: 380 mm
  • Outside Thread: M14 x 1,5
37860
Tie Rod End with nut 1
  • cone size: 18 mm
  • Fastening Type: Hexagonal
  • Fitting Position: front axle left
  • Fitting Position: front axle right
  • internal thread: M14 x 1,5
  • Outside Thread: M12 x 1,5
44797
Steering Boot Kit 1
  • Additional Information / Parts: with clamps
  • Fitting Position: front axle left
  • Fitting Position: front axle right
  • inner diameter 1: 16 mm
  • inner diameter 2: 61 mm
  • Length: 187 mm
  • Material: rubber
Technical information

Selected Language / Multilanguage

    Alternate Language

    Comparison Number(s)
    Suitable to replace Reference(s)
    Citroën 3812.F8 S1 | 3812.F8 | 3817.73 | 3817.A5 | 4066.82 | 4066.85 | 4066.92 | 4066.93
    DS 3812.F8 S1 | 3817.A5 | 4066.82 | 4066.85
    Peugeot 3812.F8 S1 | 3812.F8 | 3817.73 | 3817.A5 | 4066.82 | 4066.85 | 4066.92 | 4066.93
    Used In Vehicles
    Please select a Manufacturer for detailed Vehicle Information or to use the Expert View.