Product Information
- High protection against freezing, corrosion, and cavitation
- Prevention of deposits and foam formation
- User-friendly packaging design
- Compliance with the requirements of vehicle manufacturers
Vehicle Repairs. We've Got What It Takes.
With the use of smaller, more efficient and powerful engines, the vehicle manufacturers’ aim is to enhance the use of existing technology in the search for efficiency. Such measures include reducing friction, lowering reciprocating masses and the use of management of heat production and heat loss in design plans when producing a downsized engine. Additionally, there are multiple cooling system circuits controlled by electric and electromechanical water pumps - subject to temperature and load demands.
A perfectly functioning cooling system is a primary prerequisite for optimum operation of the engine. The right coolant makes a key contribution towards the reliable functioning of the engine cooling system in all operating and weather conditions. febi coolants are precisely matched to the special requirements of the vehicle manufacturer and offer reliable protection from damages caused by freezing, corrosion and cavitation. Additionally, they are suitable for hybrid and electric vehicles.
Range
Cooling systems require regular replacement of the coolant at set intervals as recommended by the vehicle manufacturer. febi offers a wide range of concentrated and pre-mixed coolants recommended for each vehicle application.
When using a concentrated coolant, the water used for mixing has a major influence on the effectiveness of the coolant, because water quality can differ from country-to-country and even region-to region. The water used should be ‘drinking water’ quality. If this is not possible, we recommend using distilled water for topping-up when mixing with the coolant.
Ready Mix
febi Ready Mix reliably protects against deposits, corrosion and foaming to ensure optimum heat dissipation. It does not require any further dilution and is trusted for use in outdoor temperatures as low as -35°C. Our ideal specification avoids problems with unsuitable water quality or an incorrect mixing ratio. The coolant is optimally prepared with a mix ratio of 1:1 of tested water and coolant quality meeting the required vehicle manufacturer standards.
Optimal Packaging Design
febi coolants are not only high-quality: in many instances, febi exceeds the requirements of the vehicle manufacturer, which is also complemented by the user-friendly packaging design.
The clear labelling of the products through the use of colour-coding makes their identification simple. Special recessed grips on the recyclable, leak-proof Polyethylene bottles make filling noticeably easier.
Selected Language / Multilanguage
| Suitable to replace | Reference(s) |
|---|---|
| Audi | G 011 A8C A1 | G 001 100 | G 001 1V8 | G0011V8A | G 001 1V8 A1 | G 011 V8B A1 |
| BMW | 83 19 2 211 191 | 82 14 1 467 704 | 83 19 2 211 194 | 83 19 2 211 195 | 83 19 2 211 358 | 83 19 2 211 913 | 83 19 2 211 914 | 83 19 2 304 068 | 83 19 2 304 069 | 83 51 2 355 290 | 83 51 2 355 291 | 83 51 2 355 293 | G48 | 81 22 9 407 181 | 81 22 9 407 454 | 81 22 9 407 755 | 83 19 2 179 987 | 83 51 9 401 739 | 83 51 9 407 862 |
| Ford | 1 047 035 | 5 016 436 | 5 016 437 | 5 016 438 | 5 023 844 |
| Mercedes-Benz | 000 989 08 25 S1 | 000 989 01 25 |
| Opel | 19 40 656 |
| Seat | G 011 A8C A1 | G 001 100 | G 001 1V8 | G 001 1V8 A1 | G 011 V8B A1 |
| Subaru | 16218 |
| Suzuki | 99000-99032-20X |
| Tesla | 1029320-00-A S1 |
| Vauxhall | 19 40 656 |
| Volkswagen (VW) | G 011 A8C A1 | G 001 100 | G 001 1V8 | G0011V8A | G 001 1V8 A1 | G 011 V8B A1 |
| Volvo | 31439720 | 31439721 | 31439821 |
| General Service Number | 90297545/1940656 | ASTM D3306 | CUNA NC 956-16 | DTFR 29C100 | G48 | MAN 324 NF | MB 325.2 | Paraflu 11 | VW TL 774-C | MB 325.0 |