febi | 1000000 | Repair Kit Rear Axle Drive for differential and Haldex unit | bilstein group partsfinder | Official Catalogue for febi, SWAG & Blue Print Spare Parts

	Description	Quantity	Attributes
This article is not sold separately.	Shaft Seal for differential	2	Fitting Position: left Fitting Position: right Inner Diameter: 66,36 mm Outer Diameter: 83,36 mm Width: 7,7 mm
This article is not sold separately.	Sealing Ring for rear axle differential	1	Fitting Position: front Inner Diameter: 130 mm Outer Diameter: 133 mm Width: 2,95 mm
This article is not sold separately.	Tapered Roller Bearing for differential	1	Bearing Type (Roller Bearing): Tapered Roller Bearing Height or Thickness: 14 mm Inner Diameter: 46 mm Outer Diameter: 75 mm
This article is not sold separately.	Tapered Roller Bearing for differential	1	Bearing Type (Roller Bearing): Tapered Roller Bearing Height or Thickness: 13 mm Inner Diameter: 54 mm Outer Diameter: 90 mm
This article is not sold separately.	Bolt	3	Fastening Type: internal multi-spline head Length: 87 mm Tensile Strength Grade: 8.8 Thread Length: 71 mm Thread Size: M12 x 1,5 Wrench Size (Metric): 14 mm
177755	Oil Drain Plug for Haldex coupling	1	Additional Information / Parts: with gasket Diameter 1 [mm]: 16 mm Fastening Type: internal hex Length: 40 mm Length under Head: 29 mm Material: steel Outside Thread: M10 x 1,5 Surface: zinc-lamella coated Tensile Strength Grade: 8.8 Wrench Size (Metric): 8 mm
101020	Bolt Plug for cylinder head gasket and rear axle transmission	3	Additional Information / Parts: with sealing ring Fastening Type: internal hex Fitting Position: vehicle-dependent installation positions Length: 13 mm Length under Head: 9,5 mm Material: steel Outer Diameter: 14 mm Outside Thread: M10 x 1 Thread Length: 6,5 mm Wrench Size (Metric): 5 mm
101172	Oil for Haldex coupling	1	Colour: yellow Recommended Use: VW TL 52175-Y Volume: 0,85 l
This article is not sold separately.	Bolt for flexible coupling	3	Fastening Type: external 12-point hex bit Fitting Position: rear axle Length: 54 mm Length under Head: 45 mm Outside Thread: M10 x 1,5 Tensile Strength Grade: 10.9
03004	Propshaft Bolt	12	Fastening Type: internal multi-spline head Fitting Position: vehicle-dependent installation positions Length: 57 mm Length under Head: 48 mm Material: steel Outside Thread: M8 x 1,25 Surface: zinc-lamella coated Tensile Strength Grade: 12.9 Thread Length: 46 mm
This article is not sold separately.	Snap Ring	2
32590	Gear Oil SAE 75W-90 (GL-5)	1	API: GL-5 Colour: yellow SAE viscosity class: 75W-90 Volume: 1 l
This article is not sold separately.	Oil Drain Plug for Haldex coupling	2	Length: 29 mm Length under Head: 19 mm Outer Diameter: 27 mm Thread Size: M20 x 1,5 Wrench Size (Metric): 10 mm
109660	Sealant black	1	Colour: black Content: 70 ml Highest short-term temperature: 360 °C Material: silicone Temperature Range from: -40 °C Temperature Range to: 300 °C
This article is not sold separately.	Sealing Ring for Haldex pump	2	Fitting Position: rear axle Material: FKM (fluoro rubber)

Suitable to replace	Reference(s)
Audi	0CQ 525 010 S SK \| 0BR 525 010 Q \| 0CQ 525 010 D SK \| 0CQ 525 010 F SK \| 0CQ 525 010 H SK \| 0CQ 525 010 L SK
CUPRA	0CQ 525 010 S SK \| 0BR 525 010 Q \| 0CQ 525 010 D SK \| 0CQ 525 010 F SK \| 0CQ 525 010 H SK \| 0CQ 525 010 L SK
Seat	0CQ 525 010 S SK \| 0BR 525 010 Q \| 0CQ 525 010 D SK \| 0CQ 525 010 F SK \| 0CQ 525 010 H SK \| 0CQ 525 010 L SK
Škoda	0CQ 525 010 S SK \| 0BR 525 010 Q SK \| 0CQ 525 010 D SK \| 0CQ 525 010 F SK \| 0CQ 525 010 H SK \| 0CQ 525 010 L SK
Volkswagen (VW)	0CQ 525 010 S SK \| 0BR 525 010 Q \| 0CQ 525 010 D SK \| 0CQ 525 010 F SK \| 0CQ 525 010 H SK \| 0CQ 525 010 L SK

Selected Language / Multilanguage