11155

Control Arm Bush Kit with fastening material

Fitting Position: front axle left, front axle right

11155

Product Information

Specific rubber compound reliability prevents vibrations
Optimal fitting accuracy for easier repairs
Strict quality standards
Compliance with the requirements of vehicle manufacturers

Vehicle Repairs. We've Got What It Takes.

Rubber-to-metal parts are used as elastic joints between chassis and body, especially in multi-link axle designs. They absorb the vibrations generated by the road surface and drive units while the vehicle is in motion thus making a significant contribution to increasing driving comfort and noise insulation. In addition, they ensure driving safety by improving steering behaviour and driving stability on uneven road surfaces as well as braking and avoidance manoeuvers.

In the rubber-to-metal sector, febi offers one of the widest ranges in the Independent Aftermarket - naturally in OE matching quality. This also includes bearings for control arms, which febi also offers as liquid-filled hydraulic bush.

Quality by Conviction

The control arm is attached to the body by bearings. They allow the necessary movements for the suspension, dampen shocks and vibrations, but also provide sufficient stiffness and robustness for stable driving behaviour. For this important task, only parts that meet the highest demands should be used.

Control arm bushes from febi are therefore intensively tested. Our quality management tests the offered control arm bushes for various requirements and loads, e.g. fitting accuracy, dimensional accuracy, material quality, and tensile strength.

The Right (Rubber) Compound

The elastomer materials used in the manufacturing of rubber-to-metal parts are precisely matched to the technical requirements and loads of their specific installation position. febi's product range exclusively includes rubber-to-metal parts whose rubber compounds are also used by the original manufacturers.

Videos

Kit or Set Content

	Description	Quantity	Attributes
11153	Control Arm Bush	1	Fitting Position: front Fitting Position: front axle left Fitting Position: front axle right Fitting Position: lower Height or Thickness: 97 mm Inner Diameter: 15 mm Outer Diameter: 60 mm Outer Diameter: 70 mm
11152	Control Arm Bush	2	Fitting Position: bottom front axle Height or Thickness: 48 mm Inner Diameter: 20 mm Outer Diameter: 50 mm Outer Diameter: 70 mm
This article is not sold separately.	Bolt for control arm	1	Fastening Type: internal torx Length under Head: 57 mm Outside Thread: M12 x 1,5 Tensile Strength Grade: 10.9
This article is not sold separately.	Disc	2
01554	Nut for exhaust manifold	1	DIN - ISO: 980 Fastening Type: Hexagonal Height: 10 mm Internal Thread: M10 x 1,5 Tensile Strength Grade: 10 Thread Mode: self locking Wrench Size (Metric): 16 mm
This article is not sold separately.	Lock Nut	3	Fastening Type: Hexagonal Height or Thickness: 12 mm Internal Thread: M14 x 1,5 Material: steel Surface: zinc-lamella coated Tensile Strength Grade: 8 Wrench Size (Metric): 22 mm
This article is not sold separately.	Pulley for control arm	1	Inner Diameter: 14 mm Outer Diameter: 22 mm Width: 25 mm

Comparison Number(s)

Suitable to replace	Reference(s)
Mercedes-Benz	210 330 04 75 \| 210 330 01 75

Used In Vehicles

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Trouble finding the part you were looking for?

Inform us here!

Please let us know the OE reference number for the part you cannot find. Alternatively, please include the vehicle registration or VIN with a description of the product you require. All feedback will be considered in our range development process for new bilstein group articles.

E-Mail

Country

Please provide the details below:

By submitting this form you accept our Data Protection Regulations .

Have a general inquiry?

If you have a sales, technical or warranty query - or something else entirely - please follow the link below:

Contact

FANS is a tool that allows you, as a user of partsfinder, to contribute to the ongoing development of the bilstein group product range to ensure we have the right articles - for the right applications - at the right time.