183696


183696

3 years warranty febi

Product Information

  • High-quality materials for a long service life
  • Optimal fitting accuracy for easier repairs
  • Strict quality standards
  • Compliance with the requirements of vehicle manufacturers

Vehicle Repairs. We've Got What It Takes.

The engine is generally considered to be the heart of a vehicle. Its design requires a balance between peak performance and torque and the lowest possible consumption and emissions. Modern engines are precision work - just like every single replacement part from febi.

For vehicles with timing belt drive, febi offers a comprehensive range of wear parts in OE matching quality, including timing belts. They combine the characteristics of a timing chain and an auxiliary belt (flat belt). On the inside of the belt are teeth made of abrasion-resistant rubber or plastic, which engage in a special gear wheel.

Quality by Conviction

Due to their design, timing belts have various advantages over timing chains in some engine designs. An example of such is due to the sudden pressure build-up and very high dynamic stresses which occur. Chain drives are too stiff for this type of drive and snap because of the high load peaks. Thanks to the positive fit of the teeth, higher forces can be transmitted since the teeth make slippage impossible. Importantly: the quality of the timing belt must be flawless.

Timing belts from febi are therefore intensively tested. Our quality management tests the timing belts offered for various requirements and loads, e.g. fitting accuracy, dimensional accuracy, material quality, and tensile strength.

Complete Repair Kits

When replacing the timing belt, the surrounding components should also be checked for wear. For all parts to work together perfectly, it is extremely important that they are precise and made of high-quality materials.

febi offers complete timing belt kits for certain vehicle types which contain all the individual parts required for professional replacement, e.g. the tensioner pulley.

Videos
Kit or Set Content
Description Quantity Attributes
47947
Timing Belt for camshaft (timing belt running in oil) 1
  • Belt / Kit Type: with trapezoidal tooth profile
  • Material: HNBR (hydrogenated nitrile butadiene rubber)
  • No. of Teeth: 118
  • Surface: PTFE (polytetrafluoroethylene)
  • Width: 16 mm
49559
Tensioner Pulley for timing belt 1
  • Outer Diameter: 60 mm
  • Pulley Surface Width: 26 mm
  • Width: 26 mm
47600
Idler Pulley for timing belt 1
  • Material: Plastic
  • Outer Diameter: 31 mm
  • Width: 24 mm
180196
This article is not sold separately.
Bolt for tensioner pulley 2
  • Collar Diameter: 14 mm
  • Fastening Type: Hexagonal
  • Length: 62 mm
  • Length under Head: 55 mm
  • Outside Thread: M8 x 1,25
  • Surface: zinc-nickel-coated
  • Tensile Strength Grade: 8.8
  • Wrench Size (Metric): 10 mm
180540
This article is not sold separately.
Bolt for belt pulley 1
  • Fastening Type: Hexagonal
  • Length under Head: 70 mm
  • Outer Diameter: 28 mm
  • Outside Thread: M14 x 1,5
  • Tensile Strength Grade: 12.9
  • Wrench Size (Metric): 18 mm
180147
Intake Manifold Gasket Set 1
  • Height: 5 mm
  • Inner Diameter: 45 mm
  • Material: FKM (fluoro rubber)
  • Width: 1,7 mm
179058
Auxiliary Belt 1
  • Chemical Characteristics: elastic
  • Length: 576 mm
  • Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
  • No. of Ribs: 3
47339
Crankshaft Seal 1
  • Additional Information / Parts: with mounting sleeve
  • Colour: Brown
  • Fitting Position: front side
  • Inner Diameter: 61 mm
  • Material: ACM (Polyacrylic-Rubber)
  • Material: PTFE (polytetrafluoroethylene)
  • Outer Diameter: 75 mm
  • Width: 8 mm
180539
This article is not sold separately.
Bolt for camshaft sprocket 2
  • Fastening Type: external - torx
  • Length under Head: 32 mm
  • Outer Diameter: 22 mm
  • Outside Thread: M10 x 1
  • Wrench Size (Torx): E14
180636
Gasket for timing case 1
  • Height or Thickness: 2,5 mm
  • Material: ACM (Polyacrylic-Rubber)
177566
Rocker Cover Gasket Set 1
  • Material: ACM (Polyacrylic-Rubber)
Available in Kit or Set
Customers also bought
Technical Information

Selected Language / Multilanguage

Comparison Number(s)
Suitable to replace Reference(s)
Citroën 16 545 114 80 S2 | 16 108 705 80 S1
DS 16 545 114 80 S2 | 16 108 705 80 S1
Opel 16 545 114 80 S2 | 16 108 705 80 S1
Peugeot 16 545 114 80 S2 | 16 108 705 80 S1
Vauxhall 16 108 705 80 S1 | 16 545 114 80 S2
Used In Vehicles