27825


27825

sats kuggremmar

3 years warranty febi
27825
1
Attributes
Belt / Kit Type
Belt / Kit Type:
with rounded tooth profile
No. of Teeth
No. of Teeth:
146
Width
Width:
24 mm

Product Information

  • High-quality materials for a long service life
  • Optimal fitting accuracy for easier repairs
  • Strict quality standards
  • Compliance with the requirements of vehicle manufacturers

Vehicle Repairs. We've Got What It Takes.

The engine is generally considered to be the heart of a vehicle. Its design requires a balance between peak performance and torque and the lowest possible consumption and emissions. Modern engines are precision work - just like every single replacement part from febi.

For vehicles with timing belt drive, febi offers a comprehensive range of wear parts in OE matching quality, including timing belts. They combine the characteristics of a timing chain and an auxiliary belt (flat belt). On the inside of the belt are teeth made of abrasion-resistant rubber or plastic, which engage in a special gear wheel.

Quality by Conviction

Due to their design, timing belts have various advantages over timing chains in some engine designs. An example of such is due to the sudden pressure build-up and very high dynamic stresses which occur. Chain drives are too stiff for this type of drive and snap because of the high load peaks. Thanks to the positive fit of the teeth, higher forces can be transmitted since the teeth make slippage impossible. Importantly: the quality of the timing belt must be flawless.

Timing belts from febi are therefore intensively tested. Our quality management tests the timing belts offered for various requirements and loads, e.g. fitting accuracy, dimensional accuracy, material quality, and tensile strength.

Complete Repair Kits

When replacing the timing belt, the surrounding components should also be checked for wear. For all parts to work together perfectly, it is extremely important that they are precise and made of high-quality materials.

febi offers complete timing belt kits for certain vehicle types which contain all the individual parts required for professional replacement, e.g. the tensioner pulley.

Videos
Kit or Set Content
Description Quantity Attributes
23445
 		Timing Belt 1
  • Belt / Kit Type: with rounded tooth profile
  • No. of Teeth: 146
  • Surface: PTFE (polytetrafluoroethylene)
  • Width: 24 mm
27792
 		Tensioner Pulley for timing belt, with bolt 1
  • Inner Diameter: 8 mm
  • Outer Diameter: 66 mm
  • Pulley Surface Width: 29 mm
  • Width: 29 mm
27819
 		Idler Pulley for timing belt, with bolt 1
  • Diameter of the Attachment Points: 8 mm
  • Inner Diameter: 8 mm
  • Material: metal
  • Outer Diameter: 61 mm
  • Pulley Surface Width: 28 mm
178777
This article is not sold separately.
 Mounting Kit For toothed belt drive 1
    Available in Kit or Set
    173193
    173193
    Timing Belt Kit
    with water pump
    Customers also bought
    28531
    28531
    Water Pump
    with gasket
    49192
    49192
    Camshaft Sprocket
    for timing belt
    49193
    49193
    Camshaft Sprocket
    for timing belt
    49191
    49191
    Crankshaft Sprocket
    for timing belt
    Technical Information

    Selected Language / Multilanguage

    Comparison Number(s)
    Suitable to replace Reference(s)
    Alfa Romeo 71739873 S1
    Chevrolet 93185849 | 93196786 | 93196787 | 95507809 | 95516740
    Daewoo 24422964 S1
    FIAT 71739873 S1
    Opel 16 06 314 | 93196786 | 16 06 355 | 16 06 356 | 16 06 426 | 16 29 067
    Saab 93 180 815 S1
    Vauxhall 93185849 | 93196786 | 93196787 | 95507809 | 95516740
    Used In Vehicles