31990

Šarnīra savienojuma komplekts ar papildu detaļām

Fitting Position: priekšējā ass pa kreisi, priekšējā ass pa labi

31990

Product Information

Robust construction for safe operation
Optimal fitting accuracy for easier repairs
Strict quality standards
Compliance with the requirements of vehicle manufacturers

Vehicle Repairs. We've Got What It Takes.

The greatest challenge for modern, technologically complex vehicles is the balance between performance, economy, and environmental compatibility. However, many of the roads they drive on are far from perfect. As a result, the chassis and the steering are often subjected to extreme loads, which accordingly increases the quality demands placed on wear parts.

Steering parts in particular are subject to special care in design, manufacturing, and assembly. In order to maintain stable road holding, even in hazardous situations, all installed steering parts must meet the high requirements of precise and high-quality production.

With a large selection of safety-relevant steering components in OE matching quality, including ball joints, febi makes a contribution to road safety.

Quality by Conviction

Ball joints from febi are intensively tested. Our quality management tests the ball joints on offer for various requirements and loads, e.g. accuracy of fit, dimensional accuracy, material quality, and tensile strength.

In the area of steering technology, febi is one of the leading suppliers in the Independent Aftermarket. The range exclusively includes ball joints that guarantee 100% driving stability.

Supplied Complete. Repaired Non-stop.

In everyday workshop life, it is not uncommon for a worn part to have to be replaced as well as any fixings. However, these additional parts - usually bolts or nuts - are often not included with the individually available replacement part.

With the ProKits, febi provides a remedy and offers ball joints with all attachments required for repair at fair value (e.g. bolts, washers, and lock nuts).

Videos

Kit or Set Content

	Description	Quantity	Attributes
24632	Ball Joint with nut	2	Cone Size: 12,9 mm Diameter of the Attachment Points: 10,5 mm Fitting Position: front axle left Fitting Position: front axle right Outside Thread: M12 x 1,5
22263	Nut	4	Collar Shape for Screws And Nuts: flat seat DIN - ISO: 6927 Fastening Type: Hexagonal Height or Thickness: 11 mm Internal Thread: M10 x 1,5 Material: steel Outer Diameter: 21,2 mm Surface: galvanized Tensile Strength Grade: 10 Thread Mode: self locking Wrench Size (Metric): 16 mm
This article is not sold separately.	Lock Nut for stabiliser link	2	Fastening Type: Hexagonal Fitting Position: front axle Fitting Position: rear axle Internal Thread: M12 x 1,5 Surface: yellow galvanized Wrench Size (Metric): 18 mm
This article is not sold separately.	Bolt for ball joint	2	Fastening Type: external - torx Fitting Position: front axle Length: 136 mm Length under Head: 125 mm Outside Thread: M12 x 1,5 Shank Length: 11 mm Tensile Strength Grade: 10.9 Thread Length: 114 mm Wrench Size (Metric): 55 mm
This article is not sold separately.	Bolt	4	Fastening Type: internal torx Fitting Position: front axle Length: 62 mm Outer Diameter: 17 mm Outside Thread: M10 x 1,5 Shank Length: 27 mm Tensile Strength Grade: 8.8 Thread Length: 27,5 mm Wrench Size (Metric): 50 mm
This article is not sold separately.	Dust Cap	2	Connection Diameter: 54,1 mm Fitting Position: front axle Height or Thickness: 20 mm Inner Diameter: 49,6 mm Outer Diameter: 51 mm

Technical Information

Selected Language / Multilanguage

febiINFO

Comparison Number(s)

Suitable to replace	Reference(s)
Smart	0015642V002000000

Used In Vehicles

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Trouble finding the part you were looking for?

Inform us here!

Please let us know the OE reference number for the part you cannot find. Alternatively, please include the vehicle registration or VIN with a description of the product you require. All feedback will be considered in our range development process for new bilstein group articles.

E-Mail

Country

Please provide the details below:

By submitting this form you accept our Data Protection Regulations .

Have a general inquiry?

If you have a sales, technical or warranty query - or something else entirely - please follow the link below:

Contact

FANS is a tool that allows you, as a user of partsfinder, to contribute to the ongoing development of the bilstein group product range to ensure we have the right articles - for the right applications - at the right time.