36507

testina sterzo con dado bloccaggio

Fitting Position: assale anteriore destro

36507

Attributes
Internal Thread	Internal Thread: M16 x 1,5
Length	Length: 208 mm
Outside Thread	Outside Thread: M12 x 1,5

Product Information

Long service life
Optimal fitting accuracy for easier repairs
Strict quality standards
Compliance with the requirements of vehicle manufacturers

Vehicle Repairs. We've Got What It Takes.

The greatest challenge for modern, technologically complex vehicles is the balance between performance, economy, and environmental compatibility. However, many of the roads they drive on are far from perfect. As a result, the chassis and the steering are often subjected to extreme loads, which accordingly increases the quality demands placed on wear parts.

Steering parts in particular are subject to special care in design, manufacturing, and assembly. This is why febi only offers steering parts in OE matching quality. In order to maintain stable road holding, even in hazardous situations, all installed steering parts must meet the high requirements of precise and high-quality production.

With a large selection of safety-relevant steering components, including tie rod ends, febi makes a contribution to road safety.

Quality by Conviction

Tie rod ends from febi are intensively tested. Our quality management tests the offered tie rod ends for various requirements and loads. These include fitting accuracy, dimensional accuracy, material quality, tensile strength, and degrees of hardness.

In the area of steering technology, febi is one of the leading suppliers in the Independent Aftermarket. The range exclusively includes tie rod ends that guarantee 100% driving stability.

Supplied Complete. Repaired Non-stop.

In everyday workshop life, it is not uncommon for a worn part to have to be replaced as well as any fixings. However, these additional parts - usually bolts or nuts - are often not included with the individually available replacement part.

With the ProKits, febi provides a remedy and offers tie rods with all the attachments required for repair at fair value (e.g. tie rod end piece and lock nut).

Videos

Kit or Set Content

	Description	Quantity	Attributes
This article is not sold separately.	Tie Rod End without nut	1	Fitting Position: front axle right Internal Thread: M16 x 1,5 Length: 228 mm Outside Thread: M12 x 1,5 Thread Length: 29 mm
This article is not sold separately.	Lock Nut for tie rod end	1	Fastening Type: external 12-point hex bit Fitting Position: front axle Height or Thickness: 14 mm Internal Thread: M12 x 1,5 Tensile Strength Grade: 10 Wrench Size (Metric): 23 mm

Available in Kit or Set

36547

Tie Rod

with tie rod end and lock nuts

43796

Tie Rod

with tie rod end, nut and lock nut

49419

Control Arm Kit

with joints, stabiliser links, tie rod ends and additional parts

Customers also changed

36506

Tie Rod End

with nut

Customers also bought

31696

Inner Tie Rod

with nut

Technical Information

Selected Language / Multilanguage

febiINFO

Comparison Number(s)

Suitable to replace	Reference(s)
Audi	8K0 422 818 B S1 \| 4G0 423 812 A S1 \| 8K0 422 818 A S1
Porsche	PAB 423 812 S1 \| 4G0 423 812 A S1

Used In Vehicles

Choose Manufacturer

Please select a Manufacturer for detailed Vehicle Information or to use the Expert View.

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Trouble finding the part you were looking for?

Inform us here!

Please let us know the OE reference number for the part you cannot find. Alternatively, please include the vehicle registration or VIN with a description of the product you require. All feedback will be considered in our range development process for new bilstein group articles.

E-Mail

Country

Please provide the details below:

By submitting this form you accept our Data Protection Regulations .

Have a general inquiry?

If you have a sales, technical or warranty query - or something else entirely - please follow the link below:

Contact

FANS is a tool that allows you, as a user of partsfinder, to contribute to the ongoing development of the bilstein group product range to ensure we have the right articles - for the right applications - at the right time.