40792
1
40792
Control Arm with additional parts
Fitting Position: rear axle left, rear axle right, upper
| Attributes | |
|---|---|
| Material | Material: sheet steel |
Product Information
- Robust construction for perfect function
- Optimal fitting accuracy for easier repairs
- Strict quality standards
- Compliance with the requirements of vehicle manufacturers
Vehicle Repairs. We've Got What It Takes.
Rubber-to-metal parts are used as elastic joints between chassis and body, especially in multi-link axle designs. They absorb the vibrations generated by the road surface and drive units while the vehicle is in motion and thus makes a significant contribution to increasing driving comfort and noise insulation. In addition, they ensure driving safety by improving steering behaviour and driving stability on uneven road surfaces as well as braking and avoidance manoeuvers.
Control arms are the link between the suspension strut and the bodywork. They hold the strut in position and absorb forces in the longitudinal and transverse directions when accelerating and decelerating as well as when cornering. Due to the suspension, they must be mounted so that they can move up and down. Control arms from febi are precisely manufactured and have high-quality supporting ball joints and bearings with the ideal rubber hardness and elasticity.
Quality by Conviction
In the steering technology sector, febi is one of the leading suppliers in the Independent Aftermarket. For example, control arms: the range exclusively includes control arms that guarantee 100% driving stability.
Control arms from febi are therefore intensively tested. Our quality management tests the offered control arms for various requirements and loads, e.g. fitting accuracy, dimensional accuracy, material quality, and tensile strength.
Supplied Complete. Repaired Non-stop.
In everyday workshop life, it is not uncommon for a wear part to have to be replaced as well as its attachment material. However, these additional articles are often not included with the individually available replacement part.
With the ProKits, febi provides a remedy. febi also offers complete control arm kits for certain vehicle types which contain all the mounting material such as the nuts & bolts required for a professional replacement.
febi ProKit is the tailor-made, complete solution in which necessary repairs can be carried out without delay.
![[EN] febi bilstein – Your No.1 for Steering & Suspension](https://img.youtube.com/vi/ji3PgwPST5A/0.jpg)
![[EN] Steering You Through Life with febi Steering & Suspension](https://img.youtube.com/vi/LYKIvx0mPR4/0.jpg)
| Description | Quantity | Attributes | |
|---|---|---|---|
 | Control Arm with bush, joint and nut | 1 |
|
 This article is not sold separately. | Eccentric Bolt for control arm | 1 |
|
 This article is not sold separately. | Eccentric Washer for control arm | 1 |
|
 This article is not sold separately. | Lock Nut | 1 |
|
 This article is not sold separately. | Lock Nut with captive disc | 1 |
|
Selected Language / Multilanguage
| Suitable to replace | Reference(s) |
|---|---|
| BMW | 33 32 6 774 796 S2 | 33 32 1 095 414 S2 | 33 32 6 768 269 S2 | 33 32 6 770 742 S2 |
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
