Product Information
- High wear protection
- Accuracy of fit
- Strict quality standards
- Compliance with the requirements of vehicle manufacturers
Vehicle Repairs. We've Got What It Takes.
The greatest challenge for modern, technologically complex vehicles is the balance between performance, economy, and environmental compatibility. However, many of the roads they drive on are far from perfect. As a result, the chassis and the steering are often subjected to extreme loads, which accordingly increases the quality demands placed on wear parts.
Steering parts in particular are subject to special care in design, manufacturing, and assembly. This is why febi only offers steering parts in OE matching quality. In order to maintain stable road holding, even in hazardous situations, all installed steering parts must meet the high requirements of precise and high-quality production.
With a large selection of safety-relevant steering components, febi makes a contribution to road safety.
Quality by Conviction
In order to ensure absolutely reliable absorption of the vertical and horizontal forces that occur during acceleration, braking, and cornering, febi's control arm mounting kits are intensively tested.
Our quality management tests the products offered for various requirements and loads. These include fitting accuracy, dimensional accuracy, material quality, tensile strength, and degrees of hardness.
In the area of steering technology, febi is one of the leading suppliers in the Independent Aftermarket. The product range exclusively includes control arm mounting kits that guarantee 100% driving stability and meet, or even exceed, the approval requirements.
Supplied Complete. Repaired Non-stop.
In everyday workshop life, it is not uncommon for a worn part to have to be replaced as well as any fixings. However, these additional parts - usually bolts or nuts - are often not included with the individually available replacement part.
With the ProKits, febi provides a remedy and offers control arm mounting kits with all attachments required for fair value repair. In addition to control arm bearings, attachment brackets, and ball joints, these can also include nuts, bolts, washers, and spring washers.
| Description | Quantity | Attributes | |
|---|---|---|---|
|
This article is not sold separately.
|
Bolt for control arm | 1 |
|
|
This article is not sold separately.
|
Spacer Disc for control arm | 2 |
|
|
This article is not sold separately.
|
Cage Nut for lower control arm | 1 |
|
|
This article is not sold separately.
|
Bolt for control arm bush | 1 |
|
|
|
Nut | 2 |
|
|
This article is not sold separately.
|
Bolt for control arm | 2 |
|
|
This article is not sold separately.
|
Bolt | 1 |
|
|
This article is not sold separately.
|
Lock Nut | 1 |
|
| Suitable to replace | Reference(s) |
|---|---|
| Mercedes-Benz | 246 990 01 56 S2 | 000000 005272 S2 | 002 990 70 50 S2 | 910112 014000 S2 | 000000 003275 S2 | 000000 003281 S2 | 000000 005268 S2 | 000000 007799 S2 | 000 990 66 11 S2 | 001 990 89 03 S2 | 001 990 90 03 S2 | 005 990 59 00 S2 | 156 330 01 00 SK1 | 156 330 02 00 SK1 | 156 330 05 00 SK1 | 156 330 06 00 SK1 | 220 333 00 76 S2 | 246 330 17 07 SK1 | 246 330 18 07 SK1 | 246 330 47 00 SK2 | 246 330 48 00 SK2 | 910105 014016 S3 | 913023 010002 S2 |