45411

3 years warranty febi

Product Information

  • Robust construction for safe operation
  • Optimal fitting accuracy for easier repairs
  • Strict quality standards
  • Compliance with the requirements of vehicle manufacturers

Vehicle Repairs. We've Got What It Takes.

The greatest challenge for modern, technologically complex vehicles is the balance between performance, economy, and environmental compatibility. However, many of the roads they drive on are far from perfect. As a result, the chassis and the steering are often subjected to extreme loads, which accordingly increases the quality demands placed on wear parts.

Steering parts in particular are subject to special care in design, manufacturing, and assembly. In order to maintain stable road holding, even in hazardous situations, all installed steering parts must meet the high requirements of precise and high-quality production.

With a large selection of safety-relevant steering components in OE matching quality, including ball joints, febi makes a contribution to road safety.

Quality by Conviction

Ball joints from febi are intensively tested. Our quality management tests the ball joints on offer for various requirements and loads, e.g. accuracy of fit, dimensional accuracy, material quality, and tensile strength.

In the area of steering technology, febi is one of the leading suppliers in the Independent Aftermarket. The range exclusively includes ball joints that guarantee 100% driving stability.

Supplied Complete. Repaired Non-stop.

In everyday workshop life, it is not uncommon for a worn part to have to be replaced as well as any fixings. However, these additional parts - usually bolts or nuts - are often not included with the individually available replacement part.

With the ProKits, febi provides a remedy and offers ball joints with all attachments required for repair at fair value (e.g. bolts, washers, and lock nuts).

Videos
Kit or Set Content
Description Quantity Attributes
45410
This article is not sold separately.
Ball Joint with nut 1
  • Fitting Position: front axle right
  • Fitting Position: lower
  • Outside Thread: M16 x 1,5
  • Outside Thread: M45 x 1,5 LH
  • Thread Mode: left-hand thread
  • Wrench Size (Metric): 46 mm
45409
This article is not sold separately.
Collar Nut 1
  • Height or Thickness: 18 mm
  • Internal Thread: M16 x 1,5
  • Outer Diameter: 32 mm
  • Surface: without color chromate film
  • Tensile Strength Grade: 10
  • Wrench Size (Metric): 24 mm
Technical Information

Selected Language / Multilanguage

Comparison Number(s)
Suitable to replace Reference(s)
Nissan 40160-00Q1B | 40160-00Q0F | 40160-00Q0J
Opel 44 08 252
Renault 40 16 065 63R | 40 16 023 79R | 40 16 083 74R
Vauxhall 95509251
Used In Vehicles
Please select a Manufacturer for detailed Vehicle Information or to use the Expert View.