febi | 02170 | King Pin Set with thrust bearing, single set | bilstein group partsfinder | Official Catalogue for febi, SWAG & Blue Print Spare Parts

	Description	Quantity	Attributes
This article is not sold separately.	King Pin	1	Length: 154 mm Outer Diameter: 27 mm
This article is not sold separately.	Needle Bearing for king pin	3	Bearing Type (Roller Bearing): Needle Bearing Inner Diameter: 27 mm Outer Diameter: 34 mm Width: 16 mm
This article is not sold separately.	Needle Bearing for king pin	1	Bearing Type (Roller Bearing): Needle Bearing Height or Thickness: 20 mm Inner Diameter: 27 mm Outer Diameter: 34 mm
This article is not sold separately.	Shaft Seal for king pin	1	Fitting Position: front axle left Fitting Position: front axle right Height or Thickness: 3 mm Inner Diameter: 27 mm Material: NBR (nitrile butadiene rubber) Outer Diameter: 34 mm
This article is not sold separately.	Lock Plate for king pin	2
This article is not sold separately.	Lock Pin for king pin	1
This article is not sold separately.	Thrust Washer for king pin	1	Height: 4,5 mm Inner Diameter: 28 mm Material: steel Outer Diameter: 41 mm
This article is not sold separately.	Thrust Washer for king pin	1	Article Version: old implementation
02174	Sealing Ring for king pin	2	Fitting Position: front axle left Fitting Position: front axle right Height or Thickness: 2,5 mm Inner Diameter: 32 mm Material: NBR (nitrile butadiene rubber)
This article is not sold separately.	Hex Nut	1	DIN - ISO: 934 Fastening Type: Hexagonal Internal Thread: M8 x 1,25 Tensile Strength Grade: 10
02166	Circlip	2	DIN - ISO: 472 Height: 1,5 mm
This article is not sold separately.	Spring Ring	1	DIN - ISO: 128 A Inner Diameter: 8 mm Surface: galvanized
06533	Grease Nipple	1	DIN - ISO: 71412 Outside Thread: M8 x 1
01094	Grease Nipple	1	DIN - ISO: 71412 For Vehicles with Emission Standard: Euro 6 (and others) Length: 15 mm Material: steel Outside Thread: BM8 x 1 Thread Length: 5,5 mm
01095	Grease Nipple	1	DIN - ISO: 71412 Fastening Type: external 4-point hex bit Height or Thickness: 18 mm Material: steel Outside Thread: CM8 x 1 Surface: yellow galvanized Width: 18,5 mm Wrench Size (Metric): 9 mm

Suitable to replace	Reference(s)
Daimler Buses (EvoBus)	688 330 00 19 \| 310 330 12 19
Mercedes-Benz Trucks	688 330 00 19 \| 310 330 12 19