febi | 05820 | Mounting Kit for stabiliser link | bilstein group partsfinder | Official Catalogue for febi, SWAG & Blue Print Spare Parts

	Description	Quantity	Attributes
This article is not sold separately.	Bolt for stabiliser	1	Length: 57 mm Outer Diameter: 20 mm Outside Thread: M20 x 1,5
This article is not sold separately.	Spherical Bearing for stabiliser link	1	Fitting Position: front axle Inner Diameter: 20 mm Outer Diameter: 35 mm Width: 12 mm
This article is not sold separately.	Sealing Ring	2	Inner Diameter: 25 mm Outer Diameter: 40 mm
This article is not sold separately.	Sleeve for stabiliser	2	Inner Diameter: 21 mm Outer Diameter: 24 mm Width: 7 mm
This article is not sold separately.	Toothed Lock Washer	1	DIN - ISO: 6797 Outer Diameter: 21 mm Surface: Blank Surface: oiled
This article is not sold separately.	Toothed Lock Washer	1	DIN - ISO: 6797 Inner Diameter: 21 mm Surface: Blank Surface: oiled
This article is not sold separately.	Hex Nut	1	DIN - ISO: 936 Fastening Type: Hexagonal Height or Thickness: 17 mm Internal Thread: M20 x 1,5 Tensile Strength Grade: 8
01096	Grease Nipple	1	DIN - ISO: 71412 Fastening Type: Hexagonal Height or Thickness: 15 mm Material: steel Outside Thread: M10 x 1 Surface: yellow galvanized Wrench Size (Metric): 11 mm
This article is not sold separately.	Snap Ring for king pin	2	DIN - ISO: 7993

Suitable to replace	Reference(s)
Daimler Buses (EvoBus)	360 320 00 41
Mercedes-Benz Trucks	360 320 00 41 \| 360 586 00 32