102053

Videos

Kit or Set Content

	Description	Quantity	Attributes
102052	King Pin	1	Length: 206 mm Outer Diameter: 35 mm
This article is not sold separately.	Grease Nipple	1	DIN - ISO: 71412 Fastening Type: Hexagonal Outside Thread: M8 x 1,25 Shape: B-shape
02668	Circlip for king pin	2	DIN - ISO: 472 Height: 1,75 mm Outer Diameter: 45,5 mm Surface: phosphated
This article is not sold separately.	Cap for steering hub assembly	1	Height: 6 mm Internal Thread: M8 x 1,25 Outer Diameter: 41,5 mm
This article is not sold separately.	Needle Bearing for king pin	2	Bearing Type (Roller Bearing): Needle Bearing Inner Diameter: 35 mm Outer Diameter: 42 mm Width: 40 mm
This article is not sold separately.	Bush for king pin	1	For Vehicles with Emission Standard: Euro 6 (and others) Height: 30 mm Inner Diameter: 35 mm Outer Diameter: 42 mm
This article is not sold separately.	Sealing Ring for king pin	2	Fitting Position: front axle For Vehicles with Emission Standard: Euro 6 (and others) Height or Thickness: 3 mm Outer Diameter: 34 mm
This article is not sold separately.	Cap for steering hub assembly	1	Height: 6 mm Outer Diameter: 41,5 mm
This article is not sold separately.	Shaft Seal for king pin	2	Height: 4 mm Inner Diameter: 35 mm Outer Diameter: 42 mm
103407	Thrust Bearing for king pin	1	Bearing Type (Roller Bearing): Thrust Bearing Fitting Position: front axle left Fitting Position: front axle right Fitting Position: outer For Vehicles with Emission Standard: Euro 6 (and others) Height or Thickness: 17 mm Inner Diameter: 35,25 mm Outer Diameter: 63,5 mm

Comparison Number(s)

Suitable to replace	Reference(s)
DAF	1705 454 S1

Used In Vehicles

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.