172181
1
172181
Oil Drain Plug for engine and/or transmission, with seal ring
| Characteristics | |
|---|---|
| DIN - ISO | DIN - ISO: 3869 |
| DIN - ISO | DIN - ISO: 908 |
| Fastening Type | Fastening Type: internal hex |
| Length | Length: 17 mm |
| Length under Head | Length under Head: 12 mm |
| Material | Material: steel |
| Outer Diameter | Outer Diameter: 22 mm |
| Outside Thread | Outside Thread: M16 x 1,5 |
| Thread Length | Thread Length: 8 mm |
| Wrench Size (metric) | Wrench Size (metric): 8 mm |
Product Information
- High-quality materials for absolute tightness
- Optimal fitting accuracy for easier repairs
- Strict quality standards
- Compliance with the requirements of vehicle manufacturers
Vehicle Repairs. We've Got What It Takes.
Small part with a big effect: the oil drain plug is located at the lowest point of the oil pan and closes the drain opening through which the used oil completely drains off during regular oil changes. To ensure tightness after the oil change, the sealing ring should be replaced each time the oil is changed. If the sealing ring is firmly connected to the drain plug, the complete drain plug must be replaced.
febi offers a wide range of oil drain plugs with and without the matching sealing ring in OE matching quality. Selected sealing rings are also available individually.
Quality by Conviction
All oil drain plugs supplied by febi are intensively tested by our quality management. The offered oil drain plugs are tested for various requirements and loads, e.g. fitting accuracy, dimensional accuracy, material quality, and tensile strength.
Precisely Fitting Production
Anyone who repairs their own car knows the problem: inexpensive replacement parts from the independent parts trade can deviate from the mould and can be difficult to install at the intended location.
febi makes all the difference: all replacement parts are manufactured precisely and it goes without saying that production tolerances are adhered to. This is the only way to guarantee an optimal fit.
Selected Language / Multilanguage
| Suitable to replace | Reference(s) |
|---|---|
| Audi | 01V 321 377 |
| BMW | 24 11 7 571 242 |
| Porsche | 986 397 013 01 | 986 397 013 00 |
| Škoda | 01V 321 377 |
| Volkswagen (VW) | 01V 321 377 |
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
