173042

Timing Chain Kit for camshaft and balance shaft

173042

Characteristics
Chain Pitch	Chain Pitch: 8 mm
Chain Size	Chain Size: 53RING
Chain Size	Chain Size: G53HP
Chain Size	Chain Size: G53HR
Chain Type	Chain Type: Simplex
Kit Specification	Kit Specification: "Full Kit"
Masterlink Type	Masterlink Type: not applicable ("endless" chain)
No. of Chain Links	No. of Chain Links: 144

Check the sprockets for wear and replace if necessary.

Product Information

Long service life
Optimal fitting accuracy for easier repairs
Strict quality standards
Compliance with the requirements of vehicle manufacturers

Vehicle Repairs. We've Got What It Takes.

The timing chain is an integral part of the combustion engine. As a connecting element between crankshaft and camshaft, it ensures precise synchronization and often drives other components as well.

If the camshaft and crankshaft do not run synchronously, engine performance is greatly reduced and engine management errors occur. If the timing chain becomes long or very worn, it can skip or even break. This can result in major engine damage.

In the chain drive sector, febi offers a wide range of timing chain kits in addition to individual components. These include all the individual parts required for professional replacement. In addition to the timing chains, these also include chain tensioners, tensioner rails, slide rails, and guide rails.

Quality by Conviction

Unlike a timing belt, a timing chain usually has no recommended maintenance intervals - it is designed for the entire service life of the motor. However, failure to comply with service intervals and the use of incorrect oils can greatly accelerate the wear of a timing chain and its associated components.

Timing chains, and all other related components from febi, are manufactured to the specifications and standards of the original equipment manufacturer to guarantee a perfect fit and long service life. The range includes only timing chains and components that meet, or exceed, approval requirements.

Precisely Fitting Production

Anyone who repairs their own car knows the problem: inexpensive replacement parts from the independent parts trade can deviate from the mould and can be difficult to install at the intended location.

febi makes all the difference: all replacement parts are manufactured precisely and it goes without saying that production tolerances are adhered to. This is the only way to guarantee an optimal fit.

Kit or Set Content

	description	Number	Characteristics
28719	Timing Chain for camshaft	1	article version: old implementation Chain Pitch: 8 mm Chain Size: 53RING Chain Size: G53HP Chain Size: G53HR Chain Type: Simplex Masterlink Type: not applicable ("endless" chain) No. of Chain Links: 144
This article is not sold separately.	Chain Tensioner for timing chain	1	Length: 96 mm operating mode: hydraulic Outside Thread: M22 x 1,5 Wrench Size (metric): 27 mm
This article is not sold separately.	Guide Rail for timing chain	1	Fitting Position: middle Fitting Position: upper
This article is not sold separately.	Guide Rail for timing chain	1	Fitting Position: lower
This article is not sold separately.	Crankshaft Sprocket for timing chain and oil pump chain	1	engine timing: chain No. of Teeth: 19 Width: 11,5 mm
This article is not sold separately.	Bolt for guide rail	1	Fastening Type: internal torx Length: 58 mm Length under Head: 23 mm Outer Diameter: 13,3 mm Outside Thread: M8 x 1,25 Surface: phosphated Thread Length: 19 mm
This article is not sold separately.	Bolt for guide rail	1	Fastening Type: internal torx Length: 41,5 mm Length under Head: 16 mm Outer Diameter: 11,75 mm Outside Thread: M7 x 1 Surface: phosphated Thread Length: 15 mm
This article is not sold separately.	Bolt for camshaft sprocket	2	Length: 95 mm Length under Head: 86 mm Outside Thread: M10 x 1 Surface: phosphated Tensile Strength Grade: 12.9 Wrench Size (metric): 16 mm
This article is not sold separately.	Bolt for crankshaft	1	Length: 117 mm Length under Head: 74 mm Outside Thread: M16 x 1,5 Surface: phosphated Tensile Strength Grade: 12.9 Wrench Size (metric): 22 mm
This article is not sold separately.	Bolt for timing chain	2	Fastening Type: external - torx Length: 41 mm Length under Head: 33 mm Outside Thread: M6 x 1 Surface: phosphated Tensile Strength Grade: 8.8
32987	Valve Cover Gasket	1	Material: rubber
47566	Crankshaft Seal	1	Additional Information / Parts: with mounting sleeve Fitting Position: front side Inner Diameter: 65 mm Material: PP (Polypropylene) Material: PTFE (Teflon) Outer Diameter: 79 mm Width: 20 mm
36379	Oil Pan Gasket	1	Height or Thickness: 2,4 mm Length: 452,5 mm Material: ACM (Polyacrylic-Rubber) Width: 250 mm

Customers also bought

47659

Timing Chain Kit

for camshaft

Technical information

Selected Language / Multilanguage

Alternate Language

febiINFO English

Comparison Number(s)

Suitable to replace	Reference(s)
BMW	11 31 8 618 317 S8

Used In Vehicles

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Trouble finding the part you were looking for?

Inform us here!

Please let us know the OE reference number for the part you cannot find. Alternatively, please include the vehicle registration or VIN with a description of the product you require. All feedback will be considered in our range development process for new bilstein group articles.

E-Mail

Country

Please provide the details below:

By submitting this form you accept our Data Protection Regulations .

Have a general inquiry?

If you have a sales, technical or warranty query - or something else entirely - please follow the link below:

Contact

FANS is a tool that allows you, as a user of partsfinder, to contribute to the ongoing development of the bilstein group product range to ensure we have the right articles - for the right applications - at the right time.