198953


198953

3 years warranty febi
Characteristics
Fastening Type
Fastening Type:
Hexagonal
Length
Length:
18 mm
Length under Head
Length under Head:
12 mm
Material
Material:
steel
Outside Thread
Outside Thread:
M14 x 1,5
Surface
Surface:
phosphated
Tensile Strength Grade
Tensile Strength Grade:
8.8
Thread Length
Thread Length:
11 mm
Wrench Size (metric)
Wrench Size (metric):
19 mm

Product Information

  • High-quality materials for absolute tightness
  • Optimal fitting accuracy for easier repairs
  • Strict quality standards
  • Compliance with the requirements of vehicle manufacturers

Vehicle Repairs. We've Got What It Takes.

Small part with a big effect: the oil drain plug is located at the lowest point of the oil pan and closes the drain opening through which the used oil completely drains off during regular oil changes. To ensure tightness after the oil change, the sealing ring should be replaced each time the oil is changed. If the sealing ring is firmly connected to the drain plug, the complete drain plug must be replaced.

febi offers a wide range of oil drain plugs with and without the matching sealing ring in OE matching quality. Selected sealing rings are also available individually.

Quality by Conviction

All oil drain plugs supplied by febi are intensively tested by our quality management. The offered oil drain plugs are tested for various requirements and loads, e.g. fitting accuracy, dimensional accuracy, material quality, and tensile strength.

Precisely Fitting Production

Anyone who repairs their own car knows the problem: inexpensive replacement parts from the independent parts trade can deviate from the mould and can be difficult to install at the intended location.

febi makes all the difference: all replacement parts are manufactured precisely and it goes without saying that production tolerances are adhered to. This is the only way to guarantee an optimal fit.

Kit or Set Content
description Number Characteristics
03160
 		Oil Drain Plug without seal ring 1
  • Fastening Type: Hexagonal
  • Length: 18 mm
  • Length under Head: 12 mm
  • Material: steel
  • Outside Thread: M14 x 1,5
  • Surface: phosphated
  • Tensile Strength Grade: 8.8
  • Thread Length: 11 mm
  • Wrench Size (metric): 19 mm
07215
 		Sealing Ring for oil drain plug 1
  • DIN - ISO: 7603 A/CU
  • Height or Thickness: 1,5 mm
  • Inner Diameter: 14 mm
  • Material: copper
  • Outer Diameter: 20 mm
Comparison Number(s)
Suitable to replace Reference(s)
Chevrolet 90409376 S1
Daewoo 90409376 S1 | 09275631 S1
Opel 90409376 S1 | 06 52 475 S1 | 06 52 491 S1 | 09275631 S1
Pontiac 90 409 376 S1
Saab 90 409 376 S1 | 45 02 142 S1
Vauxhall 90409376 S1 | 0652475 S1 | 0652491 S1 | 09275631 S1
Used In Vehicles