• 26001
    1

Product Information

  • High wear protection
  • Accuracy of fit
  • Strict quality standards
  • Compliance with the requirements of vehicle manufacturers

Vehicle Repairs. We've Got What it Takes.

The greatest challenge for modern, technologically complex vehicles is the balance between performance, economy, and environmental compatibility. However, many of the roads they drive on are far from perfect. As a result, the chassis and the steering are often subjected to extreme loads, which accordingly increases the quality demands placed on wear parts.

Steering parts in particular are subject to special care in design, manufacturing, and assembly. This is why febi only offers steering parts in OE matching quality. In order to maintain stable road holding, even in hazardous situations, all installed steering parts must meet the high requirements of precise and high-quality production.

With a large selection of safety-relevant steering components, febi makes a contribution to road safety.

Quality by Conviction

In order to ensure absolutely reliable absorption of the vertical and horizontal forces that occur during acceleration, braking, and cornering, febi's control arm mounting kits are intensively tested.

Our quality management tests the products offered for various requirements and loads. These include fitting accuracy, dimensional accuracy, material quality, tensile strength, and degrees of hardness.

In the area of steering technology, febi is one of the leading suppliers in the Independent Aftermarket. The product range exclusively includes control arm mounting kits that guarantee 100% driving stability and meet, or even exceed, the approval requirements.

Supplied Complete. Repaired Non-stop.

In everyday workshop life, it is not uncommon for a worn part to have to be replaced as well as any fixings. However, these additional parts - usually bolts or nuts - are often not included with the individually available replacement part.

With the ProKits, febi provides a remedy by offering control arm mounting kits with all attachments required for fair value repair. In addition to control arm bearings, attachment brackets, and ball joints, these kits can also include nuts, bolts, washers, and spring washers.

Kit Content
description Number Characteristics
24546 Control Arm with bushes, joint and lock nut 1
  • Fitting Side: front axle right
  • Fitting Side: lower
  • Fitting Side: rear
  • Material: Cast Steel
24545 Control Arm with bushes, joint and lock nut 1
  • Fitting Side: front axle left
  • Fitting Side: lower
  • Fitting Side: rear
  • Material: Cast Steel
21446 Control Arm with bushes and joint 1
  • Fitting Side: front axle right
  • Fitting Side: upper
  • Material: aluminium
21445 Control Arm with bushes and joint 1
  • Fitting Side: front axle left
  • Fitting Side: upper
  • Material: aluminium
21443 Control Arm with bush, joint and nut 1
  • Fitting Side: front
  • Fitting Side: front axle left
  • Fitting Side: lower
  • Material: aluminium
21444 Control Arm with bush, joint and nut 1
  • Fitting Side: front
  • Fitting Side: front axle right
  • Fitting Side: lower
  • Material: aluminium
  • Outside Thread: M14 x 1,5
21358 Stabilizer Link 1
  • Fitting Side: front axle right
21357 Stabilizer Link 1
  • Fitting Side: front axle left
21560 Eccentric Bolt with levelling discs and nuts 4
  • Fitting Side: front axle both sides
  • Length: 122 mm
  • Outside Thread: M14 x 1,5
23417 Ball Joint with nut 2
  • Fitting Side: bottom front axle
  • Fitting Side: lower
  • Length: 92 mm
  • Outside Thread: M14 x 1,5
29279 Mounting Kit for control arm bush 4
  • Fitting Side: front axle both sides
Customers also bought OE-Comparison
Suitable for Manufacturer OE-Number
Mercedes-Benz 211 330 81 07 S2 | 211 320 09 89 S1 | 211 320 10 89 S2 | 211 330 15 11 S2 | 211 330 16 11 S2 | 211 330 29 11 S2 | 211 330 30 11 S2 | 211 330 43 07 S2 | 211 330 44 07 S3 | 211 330 67 07 S3 | 211 330 68 07 S3 | 211 330 82 07 S2
Used In Vehicles