Product Information

  • High wear protection
  • Robust construction for perfect function
  • Accuracy of fit
  • Optimal fitting accuracy for easier repairs
  • Strict quality standards
  • Compliance with the requirements of vehicle manufacturers

Vehicle Repairs. We've Got What it Takes.

Rubber-to-metal parts are used as elastic joints between chassis and body, especially in multi-link axle designs. They absorb the vibrations generated by the road surface and drive units while the vehicle is in motion and thus makes a significant contribution to increasing driving comfort and noise insulation. In addition, they ensure driving safety by improving steering behaviour and driving stability on uneven road surfaces as well as braking and avoidance manoeuvers.

The greatest challenge for modern, technologically complex vehicles is the balance between performance, economy, and environmental compatibility. However, many of the roads they drive on are far from perfect. As a result, the chassis and the steering are often subjected to extreme loads, which accordingly increases the quality demands placed on wear parts.

Control arms are the link between the suspension strut and the bodywork. They hold the strut in position and absorb forces in the longitudinal and transverse directions when accelerating and decelerating as well as when cornering. Due to the suspension, they must be mounted so that they can move up and down. Control arms from febi are precisely manufactured and have high-quality supporting ball joints and bearings with the ideal rubber hardness and elasticity.

Steering parts in particular are subject to special care in design, manufacturing, and assembly. This is why febi only offers steering parts in OE matching quality. In order to maintain stable road holding, even in hazardous situations, all installed steering parts must meet the high requirements of precise and high-quality production.

With a large selection of safety-relevant steering components, febi makes a contribution to road safety.

Quality by Conviction

In order to ensure absolutely reliable absorption of the vertical and horizontal forces that occur during acceleration, braking, and cornering, febi's control arm mounting kits are intensively tested.

In the steering technology sector, febi is one of the leading suppliers in the Independent Aftermarket. For example, control arms: the range exclusively includes control arms that guarantee 100% driving stability.

Control arms from febi are therefore intensively tested. Our quality management tests the offered control arms for various requirements and loads, e.g. fitting accuracy, dimensional accuracy, material quality, and tensile strength.

Our quality management tests the products offered for various requirements and loads. These include fitting accuracy, dimensional accuracy, material quality, tensile strength, and degrees of hardness.

In the area of steering technology, febi is one of the leading suppliers in the Independent Aftermarket. The product range exclusively includes control arm mounting kits that guarantee 100% driving stability and meet, or even exceed, the approval requirements.

Supplied Complete. Repaired Non-stop.

In everyday workshop life, it is not uncommon for a wear part to have to be replaced as well as its attachment material. However, these additional articles are often not included with the individually available replacement part.

In everyday workshop life, it is not uncommon for a worn part to have to be replaced as well as any fixings. However, these additional parts - usually bolts or nuts - are often not included with the individually available replacement part.

With the ProKits, febi provides a remedy by offering control arm mounting kits with all attachments required for fair value repair. In addition to control arm bearings, attachment brackets, and ball joints, these kits can also include nuts, bolts, washers, and spring washers.

With the ProKits, febi provides a remedy. febi also offers complete control arm kits for certain vehicle types which contain all the mounting material such as the nuts & bolts required for a professional replacement.

febi ProKit is the tailor-made, complete solution in which necessary repairs can be carried out without delay.

Videos
Kit Content
description Number Characteristics
30514 Control Arm with additional parts, bush and joint 1
  • Fitting Side: front axle left
  • Fitting Side: lower
  • Fitting Side: rear
  • Material: aluminium
30515 Control Arm with additional parts, bush and joint 1
  • Fitting Side: front axle right
  • Fitting Side: lower
  • Fitting Side: rear
  • Material: aluminium
43507 Tie Rod with tie rod end, boot, and additional parts 1
  • Fitting Side: front axle left
  • Length: 343 mm
  • LHD / RHD: for left-hand drive vehicles only
  • Outside Thread: M14 x 1,5
  • Outside Thread: M18 x 1,5
43508 Tie Rod with tie rod end, boot, and additional parts 1
  • Fitting Side: front axle right
  • Length: 343 mm
  • LHD / RHD: for left-hand drive vehicles only
  • Outside Thread: M14 x 1,5
  • Outside Thread: M18 x 1,5
30516 Control Arm with rubber mount 1
  • Fitting Side: front
  • Fitting Side: front axle left
  • Fitting Side: lower
  • Material: aluminium
30517 Control Arm with rubber mount 1
  • Fitting Side: front
  • Fitting Side: front axle right
  • Fitting Side: lower
  • Material: aluminium
27199 Stabilizer Link with lock nuts 1
  • Fitting Side: front axle left
  • Length: 290,5 mm
  • Material: aluminium
  • Outside Thread: M10 x 1,5
27200 Stabilizer Link with lock nuts 1
  • Fitting Side: front axle right
  • Length: 290,5 mm
  • Material: aluminium
  • Outside Thread: M10 x 1,5
OE-Comparison
Suitable for Manufacturer OE-Number
BMW 31 12 6 770 849 S1 | 31 12 6 770 850 S1 | 31 12 6 769 797 S1 | 31 12 6 769 798 S1 | 31 35 6 765 933 S1 | 31 35 6 765 934 S1 | 32 21 6 762 243 S1 | 32 21 6 762 244 S1 | 31 12 6 763 699 S1 | 31 12 6 763 700 S1
BMW-Brilliance NYA
Used In Vehicles