12361

Jogo pino do eixo dianteiro sem rolamento axial, conjunto individual

12361

Characteristics
Length	Length: 219 mm
Outer Diameter	Outer Diameter: 45 mm

Kit or Set Content

	description	Number	Characteristics
This article is not sold separately.	Bush for king pin	2	height: 50 mm Inner Diameter: 45 mm Material: brass Outer Diameter: 50 mm
This article is not sold separately.	Shaft Seal for king pin	1	Fitting Position: front axle left Fitting Position: front axle right Height or Thickness: 3 mm Inner Diameter: 45 mm Material: NBR (Perbunan) Outer Diameter: 50 mm
This article is not sold separately.	Lock Plate for king pin	1	Height or Thickness: 6 mm Outer Diameter 1: 51 mm Outer Diameter 2: 54,8 mm
This article is not sold separately.	Lock Plate for king pin	1	Height or Thickness: 12 mm Height or Thickness: 6 mm internal thread: M8 x 1 Outer Diameter 1: 51 mm Outer Diameter 2: 54,8 mm Wrench Size (metric): 17 mm
04319	Sealing Ring for king pin	2
01679	Circlip	2	DIN - ISO: 472 height: 2 mm Outer Diameter: 59 mm
This article is not sold separately.	Spring Ring for king pin	1	DIN - ISO: 127 Height or Thickness: 2 mm Inner Diameter: 8 mm Outer Diameter: 14,8 mm Surface: galvanized
This article is not sold separately.	Hex Nut	1	DIN - ISO: 934 Fastening Type: Hexagonal internal thread: M8 x 1,25 Tensile Strength Grade: 10
This article is not sold separately.	Lock Pin for king pin	1	Length: 77 mm Outer Diameter: 9,9 mm Outside Thread: M8 x 1,25 Thread Length: 15 mm
01094	Grease Nipple	1	DIN - ISO: 71412 For Vehicles with Emission Standard: Euro 6 (and others) Length: 15 mm Material: steel Outside Thread: BM8 x 1 Thread Length: 5,5 mm
01097	Grease Nipple	1	DIN - ISO: 71412 Fastening Type: external 4-point hex bit Height or Thickness: 15 mm Height or Thickness: 20,3 mm Material: steel Outside Thread: BM10 x 1 Surface: yellow galvanized Width: 16,7 mm Wrench Size (metric): 11 mm

Comparison Number(s)

Suitable to replace	Reference(s)
Daimler Buses (EvoBus)	355 330 03 19 S1
Mercedes-Benz Trucks	355 330 03 19 S1 \| 355 586 00 33 S1

Used In Vehicles

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.