febi | 12362 | King Pin Set without thrust bearing, single set | bilstein group partsfinder | Official Catalog for febi, SWAG & Blue Print Spare Parts

	description	Number	Characteristics
This article is not sold separately.	King Pin	1
This article is not sold separately.	Bush for king pin	2	height: 48 mm Inner Diameter: 38 mm Material: brass Outer Diameter: 43 mm
This article is not sold separately.	Shaft Seal for king pin	1	Fitting Position: front axle left Fitting Position: front axle right Height or Thickness: 3 mm Inner Diameter: 38 mm Material: NBR (Perbunan) Outer Diameter: 43 mm
This article is not sold separately.	Lock Plate for king pin	1
This article is not sold separately.	Lock Plate for king pin	1	Outer Diameter: 47,5 mm Thread Mode: right-hand thread
This article is not sold separately.	Sealing Ring for king pin	2	Height or Thickness: 3 mm Inner Diameter: 42 mm
04328	Circlip	2	DIN - ISO: 472 height: 1,75 mm Outer Diameter: 51,5 mm Surface: phosphated
This article is not sold separately.	Spring Ring for king pin	1	DIN - ISO: 127 Height or Thickness: 2 mm Inner Diameter: 8 mm Outer Diameter: 14,8 mm Surface: galvanized
This article is not sold separately.	Hex Nut	1	DIN - ISO: 934 Fastening Type: Hexagonal internal thread: M8 x 1,25 Tensile Strength Grade: 10
This article is not sold separately.	Lock Pin for king pin	1	Length: 77 mm Outer Diameter: 9,9 mm Outside Thread: M8 x 1,25 Thread Length: 15 mm
01097	Grease Nipple	2	DIN - ISO: 71412 Fastening Type: external 4-point hex bit Height or Thickness: 15 mm Height or Thickness: 20,3 mm Material: steel Outside Thread: BM10 x 1 Surface: yellow galvanized Width: 16,7 mm Wrench Size (metric): 11 mm

Suitable to replace	Reference(s)
Daimler Buses (EvoBus)	360 330 06 19 S1
Mercedes-Benz Trucks	360 330 06 19 S1