Product Information

  • Longevity
  • Accuracy of fit
  • Strict quality standards
  • Compliance with the requirements of vehicle manufacturers

Vehicle Repairs. We've Got What it Takes.

The timing chain is an integral part of the combustion engine. As a connecting element between crankshaft and camshaft, it ensures precise synchronization and often drives other components as well.

If the camshaft and crankshaft do not run synchronously, engine performance is greatly reduced and engine management errors occur. If the timing chain becomes long or very worn, it can skip or even break. This can result in major engine damage.

In the chain drive sector, febi offers a wide range of timing chain kits in addition to individual components. These include all the individual parts required for professional replacement. In addition to the timing chains, these also include chain tensioners, tensioner rails, slide rails, and guide rails.

Quality by Conviction

Unlike a timing belt, a timing chain usually has no recommended maintenance intervals - it is designed for the entire service life of the motor. However, failure to comply with service intervals and the use of incorrect oils can greatly accelerate the wear of a timing chain and its associated components.

Timing chains, and all other related components from febi, are manufactured to the specifications and standards of the original equipment manufacturer to guarantee a perfect fit and long service life. The range includes only timing chains and components that meet, or exceed, approval requirements.

Precisely Fitting Production

Anyone who repairs their own car knows the problem: inexpensive replacement parts from the independent parts trade can deviate from the mould and can be difficult to install at the intended location.

febi makes all the difference: all replacement parts are manufactured precisely and it goes without saying that production tolerances are adhered to. This is the only way to guarantee an optimal fit.

Videos
Kit Content
description Number Characteristics
40390 Timing Chain for camshaft 1
  • Chain Pitch: 8,000 mm
  • Chain Type: toothed / silent chain
  • Masterlink Type: not applicable ("endless" chain)
  • No. of Chain Links: 130
36484 Chain Tensioner for timing chain 1
45084 VVTi Sprocket 1
  • No. of Teeth: 36
  • Outer Diameter: 81 mm
36224 Guide Rail for timing chain 1
  • Fitting Side: rear
36085 Guide Rail for timing chain 1
  • Fitting Side: front
101125
This article is not sold separately.
Bolt 1
  • Fastening Type: internal multi-spline head
  • Height or Thickness: 22,6 mm
  • Length: 98 mm
  • Length under Head: 90 mm
  • Outside Thread: M10 x 1,25
  • Tensile Strength Grade: 10.9
  • Thread Length: 32 mm
  • Width: 22,6 mm
46364
This article is not sold separately.
Bolt for camshaft sprocket 1
  • Length: 30 mm
  • Outside Thread: M10 x 1.25
101129
This article is not sold separately.
Sleeve for variable camshaft timing gear 1
  • Inner Diameter: 11,4 mm
  • Length: 52,4 mm
  • Outer Diameter: 14,2 mm
101128
This article is not sold separately.
Bolt 2
  • Fastening Type: internal torx
  • Length: 40 mm
  • Length under Head: 35 mm
  • Outside Thread: M6 x 1
  • Wrench Size (Torx): 30
101126
This article is not sold separately.
Bolt for guide rail 4
  • Fastening Type: Hexagonal
  • Height or Thickness: 14 mm
  • Length: 42,2 mm
  • Length under Head: 16 mm
  • Outside Thread: M8 x 1,25
  • Tensile Strength Grade: 8.8
  • Width: 14 mm
  • Wrench Size (metric): 14 mm
105997
This article is not sold separately.
Camshaft Sprocket for timing chain 1
  • No. of Teeth: 36
107818
This article is not sold separately.
Sprocket for crankshaft 1
  • No. of Teeth: 18
106509
This article is not sold separately.
Bolt for crankshaft 1
  • Fastening Type: external 12-point hex bit
  • Length under Head: 100 mm
  • Outside Thread: M14 x 1,5
  • Surface: zinc-lamella coated (flZnnc)
  • Tensile Strength Grade: 10.9
102422
This article is not sold separately.
Gasket for timing cover 1
  • Fitting Side: front side
106575
This article is not sold separately.
Sealing Ring 2
32471 Crankshaft Seal 1
  • Fitting Side: front side
  • Height or Thickness: 10 mm
  • Inner Diameter: 35 mm
  • Outer Diameter: 48 mm
Customers also bought Technical information OE-Comparison
Suitable for Manufacturer OE-Number
Audi 03C 109 158 A S8
Seat 03C 109 158 A S8
Škoda 03C 109 158 A S8
Volkswagen 03C 109 158 A S8 | 03C 109 507 BA S8 | 03C 103 825 A S8 | 03C 105 209 BE S8 | 03C 109 088 E S8 | 03C 109 287 G S8 | 03C 109 293 S8 | 03C 109 469 K S8 | 03C 109 509 P S8 | 03C 109 571 F S8 | 03E 109 511 S8 | N 902 562 02 S8 | N 910 486 01 S8 | N 910 972 01 S8 | N 911 970 01 S8
Used In Vehicles